8-Bit Mini 3 Axis AlexMos Brushless Gimbal Controller with IMU

This is the 8-Bit Mini 3 Axis AlexMos Brushless Gimbal Controller with IMU brought to you by DYS. The mini version packs all of the same features as the larger  versions in a small 46.6x30mm size for the main controller board. The IMU is also included along with the cable. This 8-Bit controller can be used for 3-axis camera stabilizing systems which can be mounted to a UAV or for a handheld brushless camera gimbal. More info about the AlexMos BGC at - www.basecamelectronics.com Features Changelog compared to 2.2 version: v.2.3b5- Bug fixed: multiple YAW turns caused variable overflow and instability- Bug fixed: if the system starts in the YAW lock mode, the camera can accidentally  rotate to fixed angle.- If Flight Controller (EXT_FC) is connected and calibrated, the system becomes more stable in the bigger range of inclination angles (even pitched +-80 degrees)- Battery monitoring and buzzer: - Voltage drop compensation (PID becomes stable during whole battery lifecycle) - Low-Voltage alarms and motor cut-off (This feature will be supported on some newest boards or old ones with the hardware mod: voltage divider 33k/10k connected to pin 19 and active buzzer connected to pin 32. See user manual for details (coming soon)- RC mapping improved: Any of PWM, Sum-PPM, or Analog modes may be set for any of RC inputs separately.  - it lets to use YAW-encoder or joystick together with RC control or External Flight Controller  - it may be required to re-configure RC inputs after firmware upgrade.- Serial API extended by the 'C' command (camera control). Example written in C++ for Arduino is provided in doc.- (GUI) New Full-screen mode available to better fit GUI in small displays- (GUI) Bug fixed: firmware upgrade fails if working path contains spaces Specifications Size of the board: 46.6×30 mm Power supply voltage: 9 -18 V (3s-4s LiPo) Downloads Download the 8-Bit User Manual Software Downloads for the 8-Bit AlexMos