Diatone Mamba Stack - MK4 F405 FC + 30A 3-6S BLHeli_S ESC - Mini 20x20

The Diatone Mamba MK4 Mini Stack features a 20x20 MK4 F405 Flight Controller and 30A ESC. With OSD and an MPU650 Gyro, this stack is the perfect addition to your FPV build. MK4 UPDATES Upgraded the twisted pair anti-jamming cable, and the reinforcement process MINI series upgraded DJI interface and 5V 15W/9V 18W 2 set BEC Miniseries FC use 2mm and 3mm fixing holes The entire series supports 6 set uart and |2C A full range of integrated Flash and Baro MP9943 synchronous rectifier BEC The pad area increased by 30% Pad spacing increased by 100% The whole series uses Type-C 32Bit ESC all support 128K 4set power protection Features 16M Flash Memory Blackbox 20x20mm Mounting Pattern 3~6S Lipo (12.6~25.2V) Input MAMBA MINI MK4 F405 FC MAMBA MINI 30A ESC MPU6500 GYRO 6 Uarts Buzzer OSD Specifications MAMBA MK4 F405 MINI FC Mounting: 20.0x20.0mm,M3/M2 Receiver: TBS/SBUS/IBUS/DSM GYRO Version A: Gyro MPU500 Size: 29.0x29.5x6.5mm Receiver Protection: Yes Blackbox: 16M Memory Frequency: 168MHz Software: Betaflight BEC Protection: Yes TVS Protection: Yes AIR UNIT Port: Yes ESC Signal: 6 Set MCU: STM32F405 VTX Switch: Yes Buzzer Pad: Yes Barometer: Yes OSD: AT7456E CURR Pad: Yes BEC3.3V: 0.5A Input: 6S Lipo BEC 5V: 2.5A Weight: 6.02 Uarts: 6 Set BEC 9V: 2A BF LED: Yes F.Port: Yes 12C: Yes MAMBA 30A MINI ESC Input Voltage: 3~6S Lipo 12.6-25.2V Continuous Current: 30A×4 Mounting Pattern: 20x20 Protocol: Dshot300/600 Burst Current: 40A BLHeli: BLHeli_S Target: CH40 BEC: No Includes 1x Diatone Mamba Stack - MK4 F405 FC + 30A 3-6S BLHeli_S ESC - Mini 20x20 5x M3 ESC Isolation Dampers 5x M2 ESC Isolation Dampers 5x M3 Silicone Dampers 5x M2 Silicone Dampers 1x 6-Pin Air Unit Cable 2x 8-Pin Cable