Humanoid Robot Hands with LX-824HV Serial Bus Servo Flexible Opening Robot DIY Kit for Arduino/ESP32 Programmable Robot Fingers

Humanoid Robot Hands with LX-824HV Serial Bus Servo Flexible Opening Robot DIY Kit for Arduino/ESP32 Programmable Robot Fingers Product parameter: Robot hand Working Voltage: 6-7.4V Min Working Current: 1A No-Load Current: 100mA # Spline: 25T(6mm diameter) The default wire: 30cm 180 degree rotation. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control. Can be rotated within 360 degrees when power off Control Specifications: Control Method: PWM Pulse Width: 500~2500 Duty Ratio: 0.5ms~2.5ms Pulse Period: 20ms Please make sure that the duty cycle of the controller you are using conform to our specifications, otherwise the servo can't turn up to claimed degree 1.Package list: -- 1*Big U stand -- 1*hand stent -- 1*LDX218 digital servo -- 1 set of screws -- 2* Special steering wheel the main axle steering wheel (4 mm) and the auxiliary shaft steering wheel (2 mm ) 2.Note: 1.Delivery is a bulk, need customer to install, installation is simple.Before installation, please turn servo to 90 degrees. 2.In the opening and closing of the palm of robot,servo range less than 90 degrees! So beware oflocked-rotor!