Mean Well LRS-200E-5 LED Display Power Supply

Parameters of Mean Well LRS-200E-5 LED Display Power Supply Model LRS-200E-5 Input Voltage Range (Note 4) 180 ~ 264VAC / 180 ~ 264VAC by switch 254 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz AC CURRENT 4.5A/115VAC 2.5A/230VAC LEAKAGE CURRENT <3.5mA / 240VAC INRUSH CURRENT (max.) 40A/115VAC 55A/230VAC EFFICIENCY (Typ. 80% Output RATED CURRENT  32A DC VOLTAGE  5V RATED POWER  160W CURRENT RANGE  0-40A VOLTAGED ADJ. RANGE  4.5 ~ 5.6V RIPPLE & NOISE (max.) Note.2  150mVp-p VOLTAGE TOLERANCE Note.3 ±2.0% LOAD REGULATION  ±1.0% LINE REGULATION  ±0.5% HOLD UP TIME 20ms/230VAC 16ms/115VAC at full load SETUP, RISE TIME 1000ms, 50ms/230VAC 1000ms,50ms/115VAC at full load Safety WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY STANDARDS UL60950-1 approved ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Environment  WORKING HUMIDITY  20 ~ 90% RH non-condensing  WORKING TEMP  -20 ~ +50 (Refer to output load derating curve)  TEMP. COEFFICIENT  ± 0.03%/℃ (0 ~ 50℃)  STORAGE TEMP., HUMIDITY  -20 ~ +85 , 10 ~ 95% RH  VIBRATION  10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes  Others  DIMENSION  215*115*50mm (L*W*H) MTBF 271.9K hrs min. MIL-HDBK-217F (25 ) ℃ Note 1:All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature2:Rippled &  noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor3:Tolerance: includes ast up tolerance, line regulation and load regulation4:Please connect positive pole of input voltage with mark "L" of terminal block, connect negative pole of input voltage   with mark "N" of terminal block, using DC voltage for input voltage.