VX600 Novastar LED Screen vx600 All-in-one Video Controller

Novatsar VX600 is NovaStar’s new all-in-one controller that integrates video processing and video control into one box. It features 6 Ethernet ports and supports video controller, fiber converter and Bypass working modes. A VX600 unit can drive up to 3.9 million pixels, with the maximum output width and height up to 10,240 pixels and 8192 pixels respectively, which is ideal for ultra-wide and ultra-high LED screens. Novatsar VX600 is capable of receiving a variety of video signals and processing high-resolution images. In addition, the device features stepless output scaling, low latency, pixel-level brightness and chroma calibration and more, to present you with an excellent image display experience. What’s more, the VX600 can work with NovaStar’s supreme software NovaLCT and V-Can to greatly facilitate your infield operations and control, such as screen configuration, Ethernet port backup settings, layer management, preset management and firmware update. VX600 Novastar LED Screen vx600 All-in-one Video Controller sone Features： Input connectors− 1x HDMI 1.3 (IN & LOOP)− 1x HDMI 1.3− 1x DVI (IN & LOOP)− 1x 3G-SDI (IN & LOOP)− 1x 10G optical fiber port (OPT1) Output connectors− 6x Gigabit Ethernet portsA single device unit drives up to 3.9 million pixels, with a maximum width of 10,240 pixels and a maximum height of 8192 pixels.− 2x Fiber outputsOPT 1 copies the output on 6 Ethernet ports.OPT 2 copies or backs up the output on 6 Ethernet ports.− 1x HDMI 1.3 For monitoring or video output·Self-adaptive OPT 1 for either video input or sending card output Thanks to the self-adaptive design, OPT 1 can be used as either an input or output connector, depending on its connected device. Audio input and output− Audio input accompanied with HDMI input source− Audio output via a multifunction card− Output volume adjustment supported Note: If you want to know more features, click the link to download and view: VX600-Novastar-LED-Screen-vx600-All-in-one-Video-Controller-Specification Appearance: No. Area   Function 1 LCD screen Display the device status, menus, submenus and messages. 2 Knob 1):Rotate the knob to select a menu item or adjust the parameter value. 2):Press the knob to confirm the setting or operation. 3 ESC button Exit the current menu or cancel an operation. 4 Control area 1):Open or close a layer (main layer and PIP layers), and show the layer status.  Status LEDs:  − On (blue): The layer is opened. − Flashing (blue): The layer is being edited. − On (white): The layer is closed. 2):SCALE: A shortcut button for the full screen function. Press the button to make the layer of the lowest priority fill the entire screen. Status LEDs: − On (blue): Full screen scaling is turned on. − On (white): Full screen scaling is turned off. 5 Input source buttons Show the input source status and switch the layer input source. Status LEDs: -On (blue): An input source is accessed. -Flashing (blue): The input source is not accessed but used by the layer. -On (white): The input source is not accessed or the input source is abnormal. 6 Shortcut function buttons 1):PRESET: Access the preset settings menu. 2):TEST: Access the test pattern menu. 3):Freeze: Freeze the output image.  4):FN: A customizable button  More Pictures of Novastar VX600 All-in-one LED Screen Video Controller: Download User-Manual: Novastar VX600 All-in-one LED Screen Video Controller User-Manual