3D Printer Motherboard Megatronics V3 Control Board With Welding AD597 Chip USB 2.0 Full Speed compatible

3D Printer Motherboard Megatronics V3 Control Board With Welding AD597 Chip Description 1. Megatronics has a powerful Atmega2560 processor with 256 kB memory, running at 16Mhz. 2. The board can be connected to a PC using a normal USB cable. 3. It will register as FTDI FT232R device. 4. The board is compatible with the Arduino Mega 2560 and will therefor be easily programmed from the Arduino IDE. 5. With AD597 chip, suitable for thermocouple temperature measurement. 6. The Megatronics V3.0 motherboard has been soldered to the KF2510 terminal. 7. Board dimensions : Length: approx. 109.5mm/4.31\'\' Width: approx. 90.5mm/3.56\'\' Height: approx. 18mm/0.7\'\' Features: 1. Thermo couple (2x) On board support for connecting two thermo couples 2. Autonomous printing from Micro SD card on board, also an external SD card is supported 3. LCD display bracket, which is easy to hook up.The Wiring is compatible with most LCD screens. 4. Six MOSFETs: The board has 3pcs MOSFETs (3x 25A) to support extruders, 2pcs MOSFETs fior fans and 1pcs MOSFET (IRLS3034PBF) for the heated bed 5. Four thermistors are supported. 6. Up to 6 stepper drivers. 7. Compatible with RAMPS, 6 slots for stepper drivers (not included). Modularized to make replacement easy for damaged drivers. This board also support the new DRV8825 driver. 8. It can be easily extended with LCD, keypad etc. Other features: 1. USB 2.0 Full Speed compatible 2. Auto reset can be disabled by removing a jumper 3. The board can be powered from 12V1 (12V MAX), by setting a jumper 4. The LCD contrast can be adjusted with a trimpot 5. The 5V line is protected by a 500mA resettable fuse 6. A pie is included to allow the printer to give feedback with sound 7. Each stepper driver slot has a breakout to connect external stepper drivers to the board. 8. Four layer high quality PCB board Note: This is only the board. Stepper drivers are not included. Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. 1 x 3D Printer Motherboard 1 x Data Cable '