Wireless Module E01-2G4M20S1B Electronic Components 2.4G 20dBm SMD Small-sized Wireless Module PCB Antenna SPI Rf Module

[Introduction]：E01-2G4M20S1B is a 2.4GHz SMD small-sized wireless module with PCB antenna developed  by Ebyte. Built-in power amplifier (PA) and low-noise amplifier (LNA) on the original basis, so that the maximum transmit power reaches 100mW while receiving sensitivity is further improved. Brand Name:EBYTEOrigin:Mainland ChinaCondition:NewType:Drive ICModel Number:E01-2G4M20S1BSupply Voltage:2.0~ 3.6 VOperating Temperature:-40 ~85℃Application:ComputerPackage:SMDFrequency:2.4~2.525GHzPower:19~20dBmDistance:1000mSize:14*23mmWeight:1.2±0.1gType:Wireless Module Main parameter Description Remark Voltage supply 0~3.6V Voltage over 3.6V will cause permanent damage to module Blocking power -10dBm Chances of burn is slim when modules are used in short distance Working temperature -40 ~85℃ - Distance 1000m in open and clear air, at height of 2.5m，air data rate:250kbps FIFO 32Byte Max packet length per time Crystal Frequency 16MHz - Modulation GFSK - Package SMD - Connector Half hole 1.27mm - Communication interface SPI 0-10Mbps Size 23 * 14mm with PCB antenna Antenna PCB antenna 50 ohm impedance match Electronic parameter Min. Typ. Max. Unit Condition Operating voltage 2.0 3.3 3.6 V ≥3.3 V ensures output power Communication level - 3.3 - V For 5V TTL, it may be at risk of burning down TX current - 135 - mA Instant power consumption RX current - 20 - mA  - Sleep current 19 19.5 20 μA Software is set 0dBm, built-in pa   Company Profile Ebyte Company Profile Development Testin demo pcb Product Descriptio 【Certification】E01-CE 【Certification】E01-FCC