EISEN 1440E 14" x 40" Engine Lathe with DRO, Made in Taiwan, 220V 3PH 4P/8P

-NEW- Eisen 1440E Precision Engine Lathe with DRO and 2-speed motor High quality precision lathe, Made in Taiwan. 2-Speed Motor enables 18 speed steps instead of the regular 9. Low speed is lowered to 40rpm from 80rpm. Features 14" swing x 40" distance between centers Hardened and ground bed ways Hardened and ground gears in headstock D1-4 camlock spindle with 1 9/16" spindle bore Two-speed motor provides wide spindle speed range of 40 to 2,000 rpm 3 HP main motor Precision taper roller bearings in spindle Rapid foot-operated brake Oil bath headstock, gearbox and apron lubrication PLEASE NOTE: the taper turning attachment (TTA) shown in the photos is optional equipment and not included in standard package. Specifications Model 1440E Swing over Bed 14" Swing over Cross Slide 8 3/4" Swing in Gap 20 3/4" Distance between Center 40" Width of Bed 7 9/16" Spindle Nose D1-4 Spindle Bore 1 9/16" Taper of Spindle M.T.#5 Spindle Speeds 18 Steps, 40 ~ 2000 rpm Leadscrew Diameter 15/16" Leadscrew Pitch 4 TPI Inch Threads 3 ~ 56 T.P.I (32 kinds) Metric Threads 0.4mm ~ 7.2mm (30 kinds) Longitudinal Feed Range 0.0016"~0.03" /rev Cross Feed Range 0.0008"~0.015" /rev Cross Slide Travel 6 7/8" Compound Slide Travel 4" Tailstock Quill Diameter 1 9/16" Tailstock Quill Taper M.T. #3 Quill Travel 4 3/8" Main Motor 3 HP, 220/440V, 3-Phase Coolant Pump 1/8 HP Net Weight 1364 lbs Gross Weight 1584 lbs Packing Measurement Approx(Lxwxh ) 73"x30"x58" Included Accessories Digital readout (SW4000, glass scales, 5 micron resolution) 6" 3-jaw chuck 8" 4-jaw chuck 4-way tool post Steady rest Follow rest Face plate Full length splash guard Coolant system Dead centers Center sleeve Manual & parts list Optional Accessories 5C Collet Closer with installation 5C Collet Set (1/8" ~ 1" by 16th, 15pcs) Taper turning attachment (TTA)