0.5 Inch OLED display Arduino shield

OCELL is a 0.5 inch OLED module designed as a Arduino shield and also available for other micro controllers . It is the smallest Arduino display module you can find so far.You could connect it to Ardunio micro directly without doing any PCB layout and also available for other controllers . It is a good choice for a DIYer to make a project which need a tiny COOL OLED display.FeaturesThe smallest size in all Arduino display modules so far.Very high contrast and brightness.Very low power consumptionNo backlight requiredSupported by U8glib libraryHigh lightThese OLED displays are small, only about 0.5" diameter, but very readable due to the high contrast (450cd/m^2 brightness). This display is made of 60x32 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast and very low power consumption.SpecificationPCB dimensions: 17.8mm X 15.5mmScreen size: 0.5 (inch) W. H: 15.30x10.20 mmColor: Monochrome (white)OLED type: PM -OLEDOLED driver: LD7032Pixels : 60 x 32Contrast: 2000: 1Communication: SPI, I2CNote1 pc OCELL includes: 1x module PCB , 1x OLED display , 1x10 pins headerDoes not include: ArduinoDocumentsU8glib Library download: LibraryU8lib libary WIKI: https://code.google.com/p/u8glib/wiki/galleryOCELL User Guide: uesr guide, 0.5 OLED SPEC, Device SpecFor any technical support or suggestion, please kindly go to our forum.Technical detailsDimensions 80mm x100mm x3mmWeight G.W 5gBattery Exclude