0.8 Inch 16 Segment LED Green - Common Anode

0.8 Inch 16 Segment LED Green - Common Anode

$2.99
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}

This is a 16 segment common cathode LED and is green. The advantage of 16 segment is that you can not only display 1234567890, but also ABCDEFGHIJKLM.It is compatible with bread board and can work with Arduino by adding some current limiting resistors. So, it Suitable for people who is newbie of electronic.Note: It just a segment LED without control chip.FeaturesHigh Lightlow currentlow-voltagelow energyLongevityIC-compatibleSpecification0.80 inchcommon port: 11size: 20.0 x 27.7 x 8.5mmColors: greensurface colors: BlackWorking temperature: -20~60¡ãCMechanical OutlineUnspecified Tolerances is: X¡À0.2Absolute Maximum RatingsParameterSymbolMaximum RatingUnitPower DissipationPd-mWPeak Forward CurrentIfp150mAContinuous Forward CurrentIfm20mAReverse VoltageVR5VOperating Temperature Rangetopr-40 â†?+85¡æStorage Temperature RangeTstg-40 â†?+100¡æStatic VoltageVar-V* Lead Sodering Temperature£º260¡æ for 3 seconds* For operation above 25¡æ, The Ifm Ifp & Pd must be derated, the Curent derating is -0.36mA/¡æ for DC drive and -0.86mA/¡æ for Pulse drive, the power dissipation is -0.75mW/¡æ. The product working current must not more than the 60% of the Ifm or Ifp according to the working temperature.Optical-Electrical CharacteristicParameterTest CONDITINGSymbolMinTypeMaxUnitLuminous IntensityIF=10mAIv200250300McdForward VoltageIF=10mAVF-3.2-VREVERSE CurrentVR = 5VIR-80uAPeak WavelengthIF=10mA?λp515517520nmSpectral BandwidthIF=10mA¡÷λ-40-nmView AngleIF=10mA2θ1/2--Deg.Storage & Soldering CondionsStore with care. Storing the units in bad condition will cause the reflector sheet and decrease it's adhesive power. Storage the products under the condition :temperature ( 25¡æ ¡À 10¡æ ) and humidity (65¡æ CRH¡À20¡æ CRH) our recommendation.The Soldering Temperature is 260¡À5¡æ and Soldering Time should be less than 3 sec, and soldering iron power should be less than 30W.The soldering point should be farther than 1.6mm from boby.For any technical support or suggestion, please kindly go to our forum.Technical detailsDimensions 60mm x90mm x20mmWeight G.W 6gBattery Exclude

Show More Show Less