EMB1061 BLE Module

EMB1061 is an embedded BLE module by MXCHIP. It integrates a BLE4.2 single mode SOC, including ARM Cortex-M0 Core, BLE/2.4G Radio, 24KB RAM, 160KB Flash and rich peripherals. EMB1061 uses half-hole package which is easy for soldering.Hardware diagram is shown below with three main parts:32-bit Cortex-M0 CoreBLE 2.4GHz RFPower managementWith:Up to 16MHz ARM Cortex-M0 MCU with 24KB RAM , 160KB FLASH, UART,I2C,SPI,ADC,Timer/PWMRF part: support PCB antenna or IPEX connectorPower management: DC3.3V power supply, operating voltage range: 1.7V~3.6VFeaturesBased on an ultra-low power BLE SOC- ARM Cortex-M0 Core 32MHz- 24KB RAM- 160KB FlashOperating Voltage: 1.7V¡«3.6VBluetooth Features- Support Bluetooth 4.2 (BLE single mode)- Max TX power: 8dBm- Min RX sensitivity: -87dBm- Support BLE Master/ Slave mode- Support broadcasting, data encryption,and adaptive frequency hoppingOperating Temperature£º-40¡æ to +105¡æAntenna: PCB antenna or IPEX connector (Optional)ApplicationIntelligent lightingSmart Home ApplicationWearablesSmart healthcarePortable devicesOperating ConditionsEMB1061 would be unstable when input voltage is less than the lowest rated voltage. Range of input voltage:Symbol Illustration Condition DetailsMinimum Typ Maximum UnitVDD Power Supply ¡¡ 1.7 3.3 3.6 VThere would be permanent damage in hardware if the device operates at the voltage over rated value.Meanwhile, reliability could be influenced when the device has a long-term operating at maximum voltage.Absolute maximum voltage rating:Symbol Description Minimum Typ UnitVDD Module input voltage ¨C 3.8 VVIN GPIO input voltage ? 3.8 VPower Consumption:Mode Description Average MaxTA=25¡ãC TA=25¡ãCEMB1061Power consumption CPU_HALT CPU running halted, all peripherals keep running and can wake up CPU by interrupt/event. 2.49mA 2.63mAAdvertisement(TIMER_SLEEPON) Advertise every 1.28s, keep in TIMER_SLEEP mode between the advertisement intervals. 19.53uA 8.43mAConnected Keep connected with other BLE device, communicate every 50ms, and keep in TIMER_SLEEP mode between the communication intervals. 138.96uA 8.39mAScanning Scan every 1.28s, and kee in TIMER_SLEEP mode between the scan intervals. 568.75uA 8.26mASleep TIMER_SLEEP ONCPU and all peripherals OFF, internal slow RC clock and wakeup pins ONCan be waked up by internal RTC or wakeup pins(IO9/10/11/12/13).Wake up every 10s in this test. 3.54uA 2.76mAStandby CPU and all peripherals OFF Wakeup pins ONCan be waked up by wakeup pins(IO9/10/11/12/13). 375.98nA 2.68uAWorking Environment:Symbol Name Maximum UnitTSTG Storage Temperature -40 to +110 ¡æTA Operation Temperature -40 to +105 ¡æHumidity Non-condensing, Relative humidity 95 %Electrostatic Discharge:Symbol Name Details Level Maximum UnitVESD(HBM) Electrostatic discharge voltage(Human Body Model) TA= +25 ¡ãC , JESD22-A114 2 2000 VVESD(CDM) Electrostatic discharge voltage(Charged Device Model) TA = +25 ¡ãC , JESD22-C101 II 500Part ListEMB1061 BLE Module x 1