¦ÌHex - Low Power Controller

Introduction ¦ÌHex is the first low-power controller which is compatible with Arduino. It is very suitable for the battery power supply environment. A 210mAh CR2032 cell battery could make it work 60 days long.As it is using Atmega 328 Microcontroller, it has good general and powerful performance. It packs 14 GPIO and 7 power ports (4 of them could be controlled) which could suit most of your project requirements.Designed by maker Leo Yan.Note:Bootloader is write protected, please do not attempt to update Bootloader.For large load applications (such as motor controlling), please connect VCC & GND directly or supply with independent power.FeaturesHexagon design, compact size with 14 IO ports and 7 power ports4 switchable power supply interfaces to reduce power consumptionTwo sleep-wake interfaces for convenient interactions with surroundingDesignated Arduino development librariesCross design in power and IO interfaces, directly supports 3 pin/4 pin sensor/actuatorLarge welding plate design2.54 mm standard spacing plateSpecificationMicrocontroller: ATmega328P(board type: Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega328 )Operating Voltage: 2.7 - 5V Clock Frequency: 8MHz (RC) Sleep Current: 0.12uA@3V3, 0.16uA@5V (watchdog OFF)Flash: 32 KB ( 0.5KB for bootloader) SRAM: 2 KB EEPROM: 1 KBDigital I/O Pins: 14 (PWM: 3,5,9,10,11)Analog I/O Pins: 6 UART Interface: 1 I2C Interface: 1 Interrupt interface: 2Solder Pad: 2mm£¯2.54mmPower in port: 1Power out port: 6 (4 of them could be turn-off)Maximum Current: 2ADimension: 28 x 31 x 2.3mm(1.10 x 1.22 x 0.09")Weight: 10gShipping List¦ÌHex Low-power Controller x1