Raspberry Pi PoE HAT
The Raspberry Pi Power over Ethernet HAT is a small accessory for the Raspberry Pi computer. It can be used with the Raspberry Pi 3 Model B+ and Raspberry Pi 4 Model B. The PoE HAT allows you to power your Raspberry Pi using Power over Ethernet¨Cenabled networks; for this product to be used, the network it is connected to needs to have power-sourcing equipment installed.Features:802.3af PoEFully isolated switched-mode power supply37¨C57V DC, Class 2 device5V/2.5A DC output25mm x 25mm brushless fan for processor coolingFan controlOther hardware needed£ºA Raspberry Pi 3 Model B+ or Raspberry Pi 4 Model BAn Ethernet cablePower-sourcing equipment for a 802.3af Power over Ethernet networkComplianceThe Raspberry Pi PoE HAT has undergone extensive compliance testing, and meets the following European standards:Electromagnetic Compatibility Directive (EMC) 2014/30/EURestriction of Hazardous Substances (RoHS) Directive 2011/65/EUFor all compliance certificates and numbers, please visit www.raspberrypi.org/compliance.WarningsThis product:Shall only be powered using 802.3af-compliant power sourcing equipment; any external power supply used with the Raspberry Pi shall comply with relevant regulations and standards applicable in the country of intended useShould be operated in a well-ventilated environment, and should not be coveredShould be placed on a stable, flat, non-conductive surface while in use, and should not be contacted by conductive itemsInstructions for safe useTo avoid malfunction or damage to your Raspberry Pi product, please observe the following advice:Do not block or obstruct the fanDo not insert anything into the fan at any timeDo not expose the product to water or moisture, and do not place it on a conductive surface whilst it is in operationDo not expose it to heat from any source; the product is designed for reliable operation at normal room temperaturesTake care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectorsAvoid handling the Raspberry Pi while it is connected to a power outlet; only handle by the edges to minimize the risk of electrostatic discharge damageAll other peripherals used with the Raspberry Pi should comply with relevant standards for the country of use and be marked accordingly to ensure that safety and performance requirements are met; these peripherals include, but are not limited to, keyboards, monitors, and mice used in conjunction with the Raspberry PiTechnical detailsDimensions 65mm x56.5mm x20mmWeight G.W 70gBattery ExcludePart ListRaspberry Pi PoE HAT 1