Elitech EK-3030E 110V Temperature Controller Thermost Control System

Elitech EK-3030E 110V Temperature controller is a smart communication temperature controller used for temperature controlling of cold storage and heating devices. It can be connected to the internet as control terminal and control and set parameters remotely. It has the functions: measure, display and control temperature; temperature calibration; forced defrost; over-temperature alarm and sensor failure alarm; one key factory recovery setting, parameters pre-set; key lock function, dual-way digital input, engineering password function. Communication protocol adopts MUDBUS protocol, TTL serial interface. Communication adapter card is optional to converse to 485 communication interface. Dual-way sensor input: cabinet temperature sensor and defrost sensor. Two digital input. Three way control output: Refrigeration/heating output, defrost and fan. Technical parameters: 1) Measuring range: -40℃～99℃  2) Controlling range: -40℃～85℃; 3) Accuracy: -30℃～50℃, ±1℃±0.5dig; others, ±2℃±0.5dig  4) Resolution: 0.1℃ 5) Mounting size: 71mm*29mm 6) Power supply: 110±10%(VAC), 50/60Hz  7) Power consumption:  8) Output capacity: Refrigeration: 10A/110VAC or 16A/110VAC, directly drive a single phase compressor 1HP Defrost: 10A/110VAC Fan: 10A/110VAC One way buzzer alarm output 9) Work ambient temperature: -5℃～60℃; work ambient humidity:10%¡«90% non condensing 10) Storage temperature: -25℃～75℃  11) Senor type: NTC(10KΩ/25℃, B value 3435K) Display panel can display three digits, two status indicator(key lock and fan), four parameters descriptors (temp on, temp off, def cycle, def time); The controller will lock automatically, when idle for 30 seconds. User manual: Download