EMoto Worx Surron Ultra Bee Off Road Rear Tail Light Harness

Looking to add a working brake light to your off-road Surron Ultra Bee? We have the solution. This harness will allow you to have both a running light and a stop light. **Regen braking will be disabled when this is installed** Tail light sold separately here Installation instructions: Remove the headlight mask and headlight assembly. Disconnect the Headlight Use the provided wire taps to make the following connections at the headlight plug, behind the headlight mask. Connect the single strand yellow wire from the harness that's also connected to the yellow wire of the main harness, to the black wire on the headlight plug. Connect the other black bare wire thats coming out of the 3/1 main harness to the green wire on the headlight plug. Disconnect the two wires under each brake master cylinder and connect the wires from the kit. Route the tail light harness along side the existing chassis harness on the throttle side of the bike, into the frame.  Snake the tail light harness to the insi