Altelix 17x14x6 Polycarbonate + ABS Weatherproof NEMA Enclosure with Aluminum Mounting Plate, 120 VAC GFCI Outlets & Power Cord

  Features No Electrical Wiring Required Pre-wired 5 foot 3-Prong Power Cord (2) Pre-Wired GFCI Protected 120VAC Outlets Aluminum Equipment Mounting Plate Weatherproof and UV Stable Durable Polycarbonate + ABS Available in Gray, Black, Light Ivory and OD Green RF Transparent for Wireless Devices Gasketed Lid with Dual Latches Tamper-Proof Locking Screw with Key and Provision for Padlock Includes Wall Mounting Hardware, Cable Grommets, Zip Ties, Cable Management Loop, Ground Wire Knock-Out Holes on Top & Bottom Optional Equipment Mounting Plates and Pole Mount Kits Available Applications Indoor / Outdoor WiFi Equipment SCADA Remote Terminal Unit Security and Surveillance Systems Outdoor use of Indoor Equipment Protection of Equipment from Theft or Damage Concealment of Electronic Equipment ¬† The¬†Altelix NP171406A1C-GFI NEMA Weatherproof Enclosure with 120VAC Power and Aluminum Equipment Plate¬†is ideal for protecting equipment from harsh environments and tampering. This enclosure is IP55 rated and features a fully gasketed door to protect from dust and water ingress. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. There is also a provision for padlock use. Internal and external electrical ground points are also provided.PC+ABS Polycarbonate / ABS Blend for Extreme DurabilityThese enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. PC+ABS enclosures are superior to ABS enclosures because they maintain high toughness, durability and dimensional stability even at extreme cold and hot temperatures.PowerThis configuration consists of the PC+ABS NEMA enclosure with hinged lid and a 2.0mm thick aluminum plate with two 120VAC GFCI power outlets. A 5 foot pre-wired power cord is included to power the enclosure, so no additional wiring is required. The enclosure can also be hard wired by an electrician or qualified installer. An external ground lug is provided. Two cable grommets on the enclosure allows cables to be connected to internal devices. Knock-outs are provided on the enclosure for additional wiring. Extra cable grommets are included with the accessory kit.120VAC GFCI Protected OutletThe NP141105A1C-GFI features a Ground Fault Circuit Interrupter (GFCI) outlet. Like a circuit breaker, this outlet shuts off electric power when it senses an imbalance between the outgoing and incoming current. They are ideal in locations where water may be present since they provide an extra level of protection from electrical shock. Test and reset buttons are provided on the outlet.Aluminum Equipment Mounting PlateThe enclosure and plate can be drilled and modified by the installer to suit unique site requirements.MountingThe enclosure can be wall mounted using the included wall anchors. An optional pole mount kit is also available for installation on poles up to 8 inches in diameter. *Notes:1) Interior dimensions represent maximum space available for equipment. Material PC+ABS Polycarbonate / ABS Blend Available Colors Light Ivory, Black, OD Green, Gray & Copper Mountain Voltage 120VAC Max Load 10A @ 120VAC Outer Dimensions(Height x Width x Depth) 16.5 x 13.7 x 5.3 Inches(420 x 348 x 133 mm) Inner Dimensions*(Height x Width x Depth) 11.5 x 9.0 x 4.0 Inches(292 x 229 x 102 mm) Mounting Plate Material 0.08 in (2.0 mm) Aluminum Mounting Plate Dimensions 14.9 x 11.2 in. (378 x 284 mm) Weight 5.8 lbs. (2.6 kg) Power Cord Length 5 Feet (1.5m) Ratings NEMA Type 3, 3X / IP55 Flame Rating Meets UL94-V0 Knockout Sizes (Diameter) (4) 0.62 in. (16 mm)(4) 1.02 in. (26 mm)(4) 1.30 in. (33 mm)