Altelix 12x9x7 Polycarbonate + ABS NEMA 4X Enclosure with Aluminum Equipment Mounting Plate, 120 VAC Outlets & Power Cord

Features New and Improved design provides better versatility and security No electrical wiring required (2) Internal pre-wired 120VAC power outlets Pre-wired 5 foot 3-prong power cord Features an aluminum equipment mounting plate Durable Polycarbonate + ABS construction Weatherproof and UV Stable Meets NEMA 1, 2, 4, 4X, 12, 13 and IEC 529 IP65, IP66 Gasketed lid with dual stainless steel latches Tamper-Proof locking screw with key and provision for padlock Can be mounted using external mounting feet or internal mounting feet RF transparent for wireless devices Multiple size knock-out holes on bottom of enclosure Includes (2) locking keys, cable grommets, cable glands, zip ties, hook-n-loop tape and wall mounting hardware Optional pole mount kits available Applications Indoor / Outdoor WiFi access points and routers Multi purpose utility box Home automation WiFi, LoRa and RFID gear Security and surveillance systems LED controllers IoT devices Network switches Media converters Cable TV and CCTV amplifiers Broadband equipment SCADA remote terminal Outdoor weather protection Protection against theft or damage Warehouses and public areas Concealment of equipment   New and Improved!Altelix is excited to offer the newly redesigned NP120907 series enclosures. Some of the new features include: Dual stainless steel latches Multiple mounting options - (4) external mounting feet and internal mounting points Deeper enclosure base Increased number of multiple sized knock-out holes provided on bottom of enclosure Now with (2) 120VAC power outlets The Altelix NP120907PA1C NEMA 4X enclosure is simple to install because no wiring is required. Simply mount the enclosure and plug the pre-wired 5 foot power cord into a nearby outlet. Two internal pre-wired 120VAC power outlets are provided to power your equipment.Get your project up and running quickly and transition to hard-wired later if needed. The power cord can removed and the power receptacle can be hard-wired by a qualified installer.Aluminum Equipment Mounting PlateIncluded with this enclosure is a 1.5mm thick aluminum plate for mounting and securing equipment. The plate can be easily drilled and modified by the installer to suit unique site requirements.Note: this enclosure is also available with a non-metallic PVC equipment mounting plate (see NP120907MA1C) and without an equipment mounting plate (see NP120907A1C).Secure Your EquipmentThese NP series enclosures feature a gasketed lid with dual stainless steel quick release latches. A stainless steel security screw with keys and a provision for a padlock are also provided.Polycarbonate + ABS Protection Built to LastThis enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. This enclosure can be easily drilled and modified by the installer to suit unique site requirements It meets or exceeds NEMA 1, 2, 4, 4X, 12, 13 and IEC 529 IP65, IP66.Complete with Cable Grommets and Wire Management AccessoriesThis enclosure includes an assortment of cable grommets and cable glands that can be installed in the knock-out holes for a weather resistant seal. Also included in the accessory kit are wall anchors, zip ties, wire management loops, hook-n-loop tape, ground wire, (2) door locking keys and more.Multiple Mounting OptionsThis enclosure features (4) external mounting feet which can be used for wall mounting or with our optional pole mounting kit. Mounting points are also provided inside the enclosure. These can be easily drilled out and used for applications requiring a more secure installation. Material PC+ABS Polycarbonate / ABS Blend Color Gray Voltage 120VAC Max Load 10A @ 120VAC Outer Dimensions(Height x Width x Depth) 13.0 x 10.2 x 6.9 Inches(332 x 259 x 176 mm) Inner Dimensions*(Height x Width x Depth) 7.8 x 7.1 x 5.6 inches(198 x 180 x 142 mm) Mounting Plate Material 0.06 in. (1.5 mm) Aluminum Mounting Plate Dimensions 7.7 x 7.3 in. (196 x 186 mm)) Weight 4.8 lbs. (2.2 kg) Power Cord Length 5 Feet (1.5m) Ratings Meets or Exceeds NEMA 1, 2, 4, 4X, 12, 13 and IEC 529 IP65, IP66 Flame Rating Meets UL94-V0 Industry Certifications CE Knockout Sizes (Diameter) (3) 0.62 in. (16 mm)(4) 1.02 in. (26 mm)(1) 1.30 in. (33 mm) *Interior dimensions represent maximum space available for equipment.