Altelix 17x14x9 Polycarbonate + ABS NEMA 4X RF Transparent Outdoor WiFi Enclosure with No-Drill PVC Equipment Mounting Plate

Features New design provides better versatility and security! Features a No-Drill PVC non-metallic equipment mounting plate - mount your equipment securely without the need for drilling! Durable Polycarbonate + ABS construction Weatherproof and UV Stable Meets NEMA 1, 2, 4, 4X, 12, 13 and IEC 529 IP65, IP66 Extra deep gasketed lid with dual stainless steel latches Mount additional equipment in lid - mounting bosses provided in lid for use with equipment mounting plates or DIN rails Tamper-Proof locking screw with key and provision for padlock Can be mounted using external mounting feet or internal mounting feet RF transparent for wireless devices Multiple size knock-out holes on bottom of enclosure Includes (2) locking keys, cable grommets, cable glands, zip ties, hook-n-loop tape and wall mounting hardware Optional pole mount kits available Applications Indoor / Outdoor WiFi access points and routers Multi purpose utility box Home automation WiFi, LoRa and RFID gear Security and surveillance systems LED controllers IoT devices Network switches Media converters Cable TV and CCTV amplifiers Broadband equipment SCADA remote terminal Outdoor weather protection Protection against theft or damage Warehouses and public areas Concealment of equipment   The Altelix NP171409M NEMA 4X enclosure is ideal for protecting devices from harsh environments and tampering. It features an extra deep gasketed lid, over 4 inches deep. With the generous size of this enclosure and extended lid the NP171409M can accommodate a wide range of equipment.Mount Additional Equipment in LidThe extra deep lid of this enclosure is designed so that additional equipment can be mounted in the lid for even more versatility. Raised mounting bosses are provided for use with equipment mounting plates or up to (3) Altelix 35mm DIN Rail Kits (sold separately). A large flat section is also provided for use with the hook-n-loop tape included in the accessory kit.No-Drill Non-Metallic Equipment PlateIncluded with this enclosure is a 10mm thick non-metallic PVC plate for mounting and securing equipment. Due to the "No-Drill" design of this PVC plate, mounting radios and other equipment can be done simply by using self-tapping screws.Note: this enclosure is also available with an aluminum equipment mounting plate (see NP171409P) and without an equipment mounting plate (see NP171409).RF Transparent DesignThe NP171409MA1C is ideal for WiFi applications. The non-metallic design of both the enclosure and equipment mounting plate will not interfere with the radio's operation. The size of this enclosure will fit a wide range of popular wireless access points on the market.Secure Your EquipmentThese NP series enclosures feature dual stainless steel quick release latches. A stainless steel security screw with keys and a provision for a padlock are also provided.Polycarbonate + ABS Protection Built to LastThis enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. This enclosure can be easily drilled and modified by the installer to suit unique site requirements It meets or exceeds NEMA 1, 2, 4, 4X, 12, 13 and IEC 529 IP65, IP66.Complete with Cable Grommets and Wire Management AccessoriesThis enclosure includes an assortment of cable grommets and cable glands that can be installed in the knock-out holes for a weather resistant seal. Also included in the accessory kit are wall anchors, zip ties, wire management loops, hook-n-loop tape, ground wire, (2) door locking keys and more.Multiple Mounting OptionsThis enclosure features (4) external mounting feet which can be used for wall mounting or with our optional pole mounting kit. Mounting points are also provided inside the enclosure. These can be easily drilled out and used for applications requiring a more secure installation. Material PC+ABS Polycarbonate / ABS Blend Color Gray Outer Dimensions(Height x Width x Depth) 17.1 x 13.6 x 9.3 Inches(435 x 347 x 234 mm) Inner Dimensions*(Height x Width x Depth) 14 x 9 x 7.9 Inches(355 x 228 x 200 mm) Mounting Plate Material 0.40 In. (10 mm) PVC Mounting Plate Dimensions 14.5 x 10.6 in. (368 x 269 mm) Weight 5.4 lbs. (2.4 kg) Ratings Meets or Exceeds NEMA 1, 2, 4, 4X, 12, 13 and IEC 529 IP65, IP66 Flame Rating Meets UL94-V0 Industry Certifications CE Knockout Sizes (Diameter) (4) 0.62 in. (16 mm)(4) 1.02 in. (26 mm)(1) 1.30 in. (33 mm)