Altelix Weatherproof Vented WiFi Enclosure for Amazon eero® Router with 120VAC Outlet and Power Cord
Features Designed to fit the Amazon eero® 2nd Gen Mesh WiFi Router (Model J010011) Plug-and-Play Design, Easy to Install Dual 3" Vents with Rain Shields to Expel Heat Features a RF Transparent PVC Non-Metallic Equipment Mounting Plate Pre-Wired 120VAC Power Outlet Pre-wired 5 foot Power Cord Includes Cable Glands and Grommets Zip Ties, Cable Management Straps and Wall Mounting Hardware NEMA Type 3R, 3RX / IP24 Rated Weatherproof and UV Stable Durable Polycarbonate + ABS Gasketed Lid Tamper-Proof Locking Screw with Key and Provision for Padlock Integral Mounting Feet Optional Pole Mount Kit Available Applications Protection of the eero® from Theft or Damage Indoor and Outdoor Installations Concealment of Equipment Deployment of Hospitality Wireless Networks Retail and Commercial Wireless Networks Protect Your Amazon eero® Gen2 WiFi Mesh RouterThe Altelix NP14VA1C-EER1 is a vented weatherproof enclosure designed to provide added security, vandalism and protection from harsh environments, while allowing ventilation for the Amazon eero® Gen2 WiFi mesh router. It features two 3" inch air vents with rain shields and screens.Install Your Amazon eero® Router SecurelyThis sleek enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features a gasketed hinged door with dual latches, a stainless steel security screw and provision for padlock. Integrated mounting feet simplify installation. It meets or exceeds NEMA 3R, 3RX and IP24.Amazon eero® Mesh Router MountThe NP14VA1C-EER1 features a mounting cradle specifically designed for the Amazon eero® 2nd Gen Mesh WiFi Router. Installation is easy, simply slide the eero® router into the mounting cradle. For extra security and installations subject to vibrations, an optional hook and loop strap is provided to secure the router within the mounting cradle. The mounting cradle is designed so that it will not interfere with any of the ports on the router such as power and Ethernet.Plug and Play SetupThe NP14VA1C-EER1 enclosure provides easy plug-n-play installation. Once the router is securely mounted inside the enclosure, connect its power supply to the internal 120VAC power outlet. A cable gland and cable grommets on the enclosure allow cables to be connected to the device. Simply plug the enclosure's 5 foot power cord into a power outlet and you are up and running.RF Transparent DesignThe non-metallic design of the enclosure and bracket is RF transparent and will not interfere with the WiFi signal range or coverage pattern.Complete with Cable Grommets and Glands and Wire Management StrapsFor convenience, the included accessory kit contains cable grommets and glands, wall anchors, zip ties, hook-and-loop wire management straps, door locking key and more.MountingThe enclosure can be wall mounted using the included wall anchors. An optional pole mount kit is also available for installation on poles up to 8 inches in diameter.Additional Enclosures for Amazon eero® Wireless EquipmentIn addition to this enclosure, Altelix has enclosures for a wide range of Amazon eero® wireless access points and extenders. eero® is a trademark or registered trademark of Amazon Technologies, Inc. Material Polycarbonate + ABS Available Colors Gray, Black, Light Ivory, OD Green Voltage 120VAC Max Load 10A @ 120VAC Outer Dimensions(Height x Width x Depth) 13.4 x 11.5 x 6.3 Inches(340 x 293 x 160 mm) Inner Dimensions*(Height x Width x Depth) 9.5 x 8.0 x 3.8 Inches(241 x 203 x 98 mm) Mounting Plate Material 0.25 in. (6.4mm) PVC Weight 4.1 lbs. (1.8 kg) Power Cord Length 5 Feet (1.5m) Ratings NEMA Type 3R, 3RX / IP24 Flame Rating Meets UL94-V0 Compatible eero® Model eero® 2nd Gen Mesh WiFi Router(Model J010011)