Mini 1.9CC Horizontal Single Cylinder Four-stroke Internal Combustion Engine Model for Three-Wheelers

Mini 1.9CC Horizontal Single Cylinder Four-stroke Internal Combustion Engine Model for Three-Wheelers Features: 1. Benz three-wheeled car engine: A model based on the first car engine, with transverse cylinders and a large flywheel, all of which highlight the charm of this engine. The advantage of this model lies in its ingenious structural design, and each component restores the mechanical principle. An all-metal engine model that can be started.2. Excellent manufacturing: We use precision casting for the entire engine, and every part is carefully crafted. The contours of the cylinder block and other parts of the casting process are very ingenious, becoming the most prominent feature of the first automobile engine. You will feel the unique charm brought by the mechanical operation of the engine.Engine starting steps: (1) Check the engine wiring from the wooden base, connect the fuel tank oil pipe, and install 3 AA batteries (4.5V); (2) Add 95# gasoline to the fuel tank. After the filling is completed, put the flywheel in Turn the right side of the engine (surface of the power switch) clockwise for many turns, which will allow the mixed fuel to completely enter the cylinder and ensure that there is no air in the fuel pipe; (3) Turn on the power switch, and then quickly turn the flywheel clockwise to allow the mixed fuel to completely enter the cylinder. (surface of power switch) to start the engine.Notes: (1) If the ignition device is normal and the cylinder compression is normal, but the machine cannot start normally, it is likely that the carburetor oil needle needs to be adjusted; (2) After tightening the main oil needle on the carburetor, loosen 1/4 Turn and start the flywheel so that the mixing ratio of gasoline and air reaches the normal working mixing ratio; (3) When the machine stops running, the power switch should be turned off. Parameters: Item number: R18;Material: brass/stainless steel/wood;Color: as shown in the picture;Size: 150*110*100mm;Flywheel diameter: 100mmWeight: 1200g;Displacement: 1.9CC;Cylinder diameter: 13mm;Stroke: 18mm;Ignition device power supply voltage: 4.5V (uses 3 AA batteries, batteries not included);Starting method: external starting wheel or manual.