Mini360 Ultra-Small 1-17V Output DC-DC Step-Down Buck Converter Module RCs, Quadcopters, Drones, DIY

The Mini360 buck converter step down voltage regulator board is designed for use with RC airplanes, quadcopters, drones, RC cars, Arduino and other micro-controllers, and other DIY electronics needing an ultra-miniature, light weight step-down voltage regulator. It uses an integrally molded power inductor and synchronous rectifier control chip for a smaller and more efficient design. It accepts any input voltage from 4.75V to 23V, and generates an output adjustable from 1V to 17V with the onboard potentiometer. Specifications: Model Name: Mini-360 (ultra small size DC-DC synchronous rectifier buck module)  Module Properties: Non-isolated buck regulator module  Rectification: Synchronous rectification  Input voltage: 4.75V-23V  Output voltage: 1.0V-17V  Output Current: 3A peak, 1.8A continuous  Conversion efficiency: 96% (maximum)  Switching Frequency: 340KHz  Output ripple: 30mV (no-load)  Load regulation: ± 0.5%  Voltage regulation: ± 2.5%  Working temperature: -40 C to +85 C  Dimensions: 17mm x 11mm x 4mm (0.67 x 0.43 x 0.16 inches) L x W x H Weight: 1 Gram Operation: Connect the input voltage to the IN+ and IN- connections. Test voltage using a voltmeter and adjust to proper voltage before installing in your device. The output voltage must be less than the input voltage. Disconnect or turn off the input voltage and connect the OUT+ and OUT- connections to your device, then reconnect the input voltage.   Package includes: 1X Mini360 Buck Converter 4.75-23V In 1-17V Out 1.8A Step Down Regulator Link to online specification and operation notes