Single Channel LoRa IoT Gateway
* NOTE This Gateway is for use with the Private LoRa Protocol and is not recommended for LoRaWAN use. * Import Duties and Taxes (VAT) are EXCLUDED. * This gateway is only available in EU868 MHz OLG01-N is an open-source single-channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, Or 3G/4G cellular via an optional LTE module. The LoRa wireless allows users to send data and reach extremely long ranges at low data rates. It provides ultra-long range spread spectrum communication and high interference immunity. OLG01-N has rich internet connection methods such as a WiFi interface, Ethernet port, and USB host port. These Interfaces provide flexible methods for users to connect their sensor networks to the Internet. OLG01-N can support Limited LoRaWAN protocol in single frequency and customized LoRa transmit protocol. Different from OLG01, OLG01-N uses Linux to directly control the sx1276/sx1278 LoRa module which increases the communication efficiency and simplifies the software design. OLG01-N can be used to provide a low-cost IoT wireless solution to support 50~300 sensor nodes.Except for LoRaWAN mode, LG01-N can support multiple working modes such as MQTT mode, and TCP/IP Client mode to fit the different requirements for IoT connection. LG01-N is based on the sx1276 solution which provides a low cost for your IoT network connection. Compare the cost with the normal SX1301 LoRaWAN solution. the LG01-N is only of its 1/4 or less cost. This makes the OLG01-N very suitable to set up a small-scale LoRa network. Highlighted Features Open Source OpenWrt system Low power consumption Firmware upgrade via Web Software upgradeable via network Flexible protocol to connect to IoT servers Auto-Provisioning Built-in web server Managed by Web GUI, SSH via LAN or WiFi Internet connection via LAN, WiFi, Or 3G/4G via an optional LTE module Failsafe design provides a robust system 1 x SX1276/SX1278 LoRa module Limited support in LoRaWAN/ Support Private LoRa protocol Support up to 300 nodes LoRa band 868MHz Max range in LoRa: 5~10 km. Density Area:>500m Specification Linux Side: Processor: 400MHz, 24K MIPS Flash: 16MB; RAM: 64MB Cellular 4G LTE (optional): Quectel EC25 LTE module (Click the link to find the right model for your region) Micro SIM Slot Internal 4G Antenna + External 4G Sticker Antenna. Up to 100Mbps downlink and 50Mbps uplink data rates Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage MIMO technology meets demands for data rate and link reliability in modem wireless communication systems Interfaces: 10M/100M RJ45 Ports x 2 WiFi: 802.11 b/g/n LoRa Wireless Power Input: 12V DC 1 x LoRa Interface System Overview Documentation Datasheet User Manual Source Code: Hardware - Motherboard Source Code: Hardware - LoRa Module Source Code: Software LoRa Gateway Selection Guide