
Wireless Light Sensor and 1-Phase Current Meter with 1x75A Clamp-On CT
The NETVOX Wireless Light Sensor and 1-Phase Current Meter with 1x75A Clamp-On CT are used to detect single-phase electrical input current and ambient light intensity detection. The device is compatible with the LoRaWAN protocol and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway. The device adopts the split-core current transformer, which can be conveniently connected to the measuring device. Documentation Data Sheet User Manual Highlighted Features Apply SX1276 wireless communication module 2 sections of ER14505 battery (3.6V / section) in parallel Protection level: Main body IP53; Clamp-On CT IP30 The base is attached with a magnet that can be attached to a ferromagnetic material object The clamp-on CT allows easier installation to the device you would like to detect the current from LoRaWANTM Class A compatible *Frequency Hopping Spread Spectrum (FHSS) Third-Party online wireless sensor monitoring and notification system to configure sensors, view data, and set alerts via SMS text and email (optional) Available third-party platforms: Actility/ThingPark, TTN, MyDevices/Cayenne It has improved power management for longer battery life. *Battery Life: Please refer to this link: Battery Life Indication Sheet TAKE NOTE 1. The actual range may vary depending on the environment.2. Battery life is determined by sensor reporting frequency and other variables Specifications Electric: Power supply 2 section of ER14505 battery (3.6V / section) in parallel Battery life Battery life are 5 years(condition: ambient temperature 25 ℃, report once every 30 mins, txpower = 20dBm, LoRa spreading factor SF = 10) Stand-by current 36uA Wake-up current 7mA RF receiving current 11 mA @ 3.3V RF emission current 127 mA @ 3 .3 V Battery measurement accuracy ± 0.1V Current measurement error value ± 1% Current resolution 1mA Current measurement accuracy 100mA to 75 A(varies according to the configuration of the current transformer) *Specific electrical characteristics may vary depending on the power supply voltage Frequency: Frequency range 863MHz-928MHz 470MHz-510MHz TX Power US915 20dbm;AS923 16dbm;AU915 20dbm;CN470 19.15dbm;EU868 16dbm;KR920 14dbm;IN865 20dbm; Receiving sensitivity -136dBm(LoRa, Spreading Factor = 12, Bit Rate = 293bps);-121 dBm( FSK, Frequency deviation = 5kHz, Bit Rate = 1.2kbps) Antenna type Built-in antenna Communication distance 10 km(the actual transmission distance depends on the environment. ) Data transfer rate 0.3kbps ~ 50k bps Modulation system mode LoRa / FSK (Note: you can choose one of them) Available LoRaWAN Band EU863-870, US902-928, AU915-928, KR920-923, AS923, CN470-510(Note: optional, to be done in the factory configuration) Physical: Size Main body size: L:112 mm * W:88.19 mm * H:32 mmSensor size: H:42.5 * L:27.5 * W:25mm Main Body Weight Approximately 141 g Sensor Weight About 49.6 g Sensor External Wiring Length Approximately 900mm Ambient Operating Temperature Range -20℃ ~ 55℃ Ambient Storage Temperature Range -40℃ ~ 85℃ Ambient Humidity Range <90% RH (non-condensing) Fixed Way Screw / magnet