Insta-Cure+ Gap Filling Medium CA Pocket Super Glue

Details: Insta-Cure+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as lamination's, INSTA-CURE+ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. 1 oz.  The 1oz. comes with BSI's #304 extender tip that can be used on the nozzle for finer applications. Insta-Cure+ is perfect when gluing balsa wood and softwood, but also works well for hardwoods, glass, metal, fiberglass, ceramics, hard plastics, and rubber. In addition, it's also water-resistant. When cyanoacrylate glue dries, it dries crystal clear, does not discolor, nor foams making it a great choice for hobby enthusiasts and de