Handheld Thermocouple Meter with Dual Thermocouple Inputs

Handheld Thermocouple Meter with Dual Thermocouple Inputs Handheld Thermometer accepts 7 Different types of thermocouple inputs. Simply plug in the miniature male connector on your thermocouple sensor and push the Type button for K, J, T, E, N or R/S calibration) to match the sensor. Exceptionally Easy to use with an automatic display of two thermocouple inputs, with the touch a button switch between a Single or Dual temperature measurement.  The Differential between the two temperature measurements is displayed. 2 High Quality Type K beaded thermocouples included (a $36.00 value) Replacement part number K1X-WBWX-30G-EX-0.25-PFXX-40-MPCX The thermocouples are Made in the USA by the Evolution Sensors team with High Accuracy SLE thermocouple grade wire. The exposed bead is 40 inches ( 3 plus ft or 1 meter) of flexible 30 gage wire with 500 F (260 C) rated PFA insulation and a miniature male thermocouple connector attached.  Dual Temperature measurements require the sensors to be the Same Type thermocouple calibration. For example K and K, or T and T. Click Spec Sheet Evosensors part number: HHU-2B  Location: H-5-1 Additional Products Customers have Purchased to complete their Temperature Measurement System.    Meter can measure the full range of the thermocouples although the Accuracy is rated from negative -50 to 300°C accuracy within 1.5%. Select °F or °C measurement with the touch of a button. The meter provides the ability to Capture, Hold and Display Maximum, Minimum and Average temperature readings LCD Display measuring 1.6" (40 mm) x 1.9" (50 mm) with automatic back lighting. Meter dimensions are 5.7" (145 mm) Long x 2.8" Wide x 1.1" (29  mm) Thick. Batteries are included. EvoSensors Part Number: HHU-2B