BIGTREETECH TMC5160T Plus V1.0 Stepper Motor Driver With Heatsink case

 TMC5160T Plus V1.0 Driver with Heatsink TMC5160T Plus is a high-power stepper motor driver control module, featuring 8 high-power MOSFETs separately mounted on the board with a maximum voltage of 60V. This supports a wider range of stepper motors and offers greater adaptability. About this item 8 high-power MOSFETs separately mounted on the motherboard with 100V voltage resistance, 93A current resistance, and equivalent resistance as low as 6mΩ, significantly enhancing the drive's performance. Supports a maximum voltage of 60V, a maximum effective current (IRMS) of 10.6A, and a sine wave peak current of up to 15A; Stealth Chop mode and Spread Cycle mode selectable, with standalone mode, UART mode, and SPI mode selectable. Integrated heat sink design, providing high heat dissipation while enhancing structural integrity and aesthetics; Heat sink pre-designed with fan mounting holes for DIY fan installation. On-board 24V always-on fan interface facilitates active cooling; ESD protection on the drive power, logic power, etc., to prevent damage due to power fluctuations and static electricity. Supplied with adapters and wires for both standard drives and EZ drive, for user convenience; Encoder interface reserved for DIY usage; TMC5160 specs: Input Voltage (HVIN): 8V-60V Maximum Effective Current: 10.6A, Sine Wave Peak Current 15A Capacitor: 2 x 560uF Maximum Subdivision: 256 Operating Mode: SPI, SD Sampling Resistor: 22mΩ More info can be found here: 5160T Plus