Simpson H10A Hurricane Tie - G90 Galvanized

Model No. H10A Finish Spec. G90 Galvanized Thickness: 18 Gauge Product Guide & SPECS : View Specifications The H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided ties. H10A models come with optional fastener holes to connect roof blocking to the top plate. Slots allow field bending up to a maximum pitch of 6:12 to accommodate angled blocking. Installation: Use all specified fasteners. Fasteners Required: Nails 0.148" x 1-1/2" or #9 x 1 1/2" Strong-Drive SD Connector screws Hurricane ties do not replace solid blocking. When installing ties on plated trusses (on the side opposite the truss plate) do not fasten through the truss plate from behind. This can force the truss plate off of the truss and compromise truss performance. H10A optional nailing to connect shear blocking, use Nails 0.