ToolkitRC M8 Battery 300w 15A Charger, Cell Checker, Servo Tester, Receiver Tester & Variable DC Output controller
The new iToolkit is much more than just another charger! With a 300w 15A Charger at its heart the iToolkit device also has a servo tester, cell checker, a watt meter, PWM/PPM/Sbus input testers and output generators along with a variable voltage and amperage DC output control. FeaturesBattery ChargerCell CheckerServo TesterPWM,PPM.SBUS Input/output Receiver & Flight control testerViable AMp/volt DC Power supply (Required external DC input)Specs● Charge, discharge and balance management support LiPo, LiHV,LiFe 1-8S，NiMh 1-20S，PB 1-12S battery.● Charger current：MAX 15A @ 300W● Discharge current：reccycle mode 15A @ 300W Normal: 3A @ 20W● Balance current: 400mA @ 2-8S● Lithium battery cut-off voltage can be set (TVC function)● Measure battery voltage, internal resistance, balance● ESC power meter, together with output voltage and throttle signal● Measure PWM / PPM / xBUS signal values, Accuracy 1ms● Output PWM / PPM / xBUS standard signal, Accuracy 1ms● Customizable 5-30V constant voltage, 1-15A constant current● Charge the drone battery, activate and charge.● Multi-language optional● USB 2.1A@5.0V Output，for Mobile devices● Udisk firmware upgrade (Slave device)ChargerInput voltage: 7.0-30.0V @MAX 16AType of battery: Lipo LiHV LiFe @1-8S NiMh @1-20S Pb @1-10SBalance current: 400mA @2-8SCharge power: 300W @MAX 15ADischarge power: 300W @MAX 15A Recycle mode 12W @ 3A Normal modeUSB: 2.1A @5.0V or UpgradeDimensions: 98*68*35 mmWeight: 142gLCD: 2.2inch, 132*64 Pixel，black and white MeasurementPWM: 880-2200us @20-400HzPPM: 880-2200us*8CH @20-50HzSBUS: 880-2200us*16CH @20-100HzVoltage: 1.0-5.0V @1-8SIR: 10-500mR @1-8SESC: 300W @Max 15A OutputPWM: 880-2200us @20-400HzPPM: 880-2200us*8CH @20-50HzSBUS: 880-2200us*16CH @20-100HzPower: 1.0-30.0V @1.0-15A Mode:CC+CVOverCurrent Cut Off time: 50ms