LOT OF 2 - WAGO, 788-507 Relay module - NEW NO BOX

LOT OF 2 - WAGO,  788-507 Relay module - NEW NO BOX Relay module; Nominal input voltage: 115 VAC; 1 changeover contact; Limiting continuous current: 16 A; Red status indicator; Module width: 15 mm; 2,50 mm²; gray PRODUCT DISCLOSURE: All products were acquired by Freeman Liquidators from a sale of merchandise subject to a commercial insurance loss. Freeman Liquidators is a secondary seller of products, is not affiliated with or sponsored by the manufacturer of the products and is not a manufacturer authorized seller of the products. Sale of this product by Freeman Liquidators is not subject to the policies of the manufacturer. Any warranty offered by the manufacturer is not available to you as the purchaser. All products are NEVER USED but external packaging will have damage. Some items may be placed into other packaging to ensure safe shipping. All items are opened for inspection prior to shipment to ensure the best quality of products. Freeman Liquidators guarantees your satisfaction. If you are not completely satisfied with a purchased product, within 30 days from the date of purchase, return the product in its packaging and Freeman Liquidators will fully refund your money. PRODUCT SPECIFICATIONS Notes Safety information 1 A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements. Note Reinforced insulation between coil and contacts To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit. Technical data Control Circuit Nominal input voltage UN AC 115 V Input voltage range ±10 % Nominal input current at UN 8 mA Load circuit Number of changeover contacts 1 Contact material (relay) AgNi 90/10 Limiting continuous current 16 A Inrush current (resistive) max. (AC) 30 A / 4 s Switching voltage (max.) AC 250 V Switching power (resistive) max. AC 4000 VA; DC (see load limit curve) Switching capacity AC-15: 6 A / AC 250 V; DC-13: 2 A / DC 24 V Recommended minimum load 12 V / 10 mA Pull-in time (typ.) 10ms Drop-out time (typ.) 35ms Bounce time (typ.) 6ms Electrical life (NO; resistive load; 23 °C) 30 x 10³ switching operations Mechanical life 5 x 10⁶ switching operations Switching frequency with/without load (max.) 6 min-1 / 600 min-1 Signaling Status indicator Red LED Safety and protection Rated voltage 250V Rated surge voltage 4kV Pollution degree 3 Dielectric strength (control/load circuit) (AC, 1 min) 5 kVrms Dielectric strength (open contact) (AC, 1 min) 1 kVrms Safety information 1 A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements. Protection type IP20 Connection data Connection technology Push-in CAGE CLAMP® Solid conductor 0.34 … 2.5 mm² / 22 … 14 AWG Fine-stranded conductor 0.34 … 2.5 mm² / 22 … 14 AWG Strip length 9 … 10 mm / 0.35 … 0.39 inches Physical data Width 15 mm / 0.591 inches Height 86 mm / 3.386 inches Depth from upper-edge of DIN-rail 54 mm / 2.126 inches Mechanical Data Mounting type DIN-35 rail Material Data Color gray Fire load 0.67MJ Weight 44.9g Environmental requirements Ambient temperature (operation at UN) -40 … 70 °C Ambient temperature UL (operation at UN) -40 … 40 °C Surrounding air temperature (storage) -40 … +70 °C Processing temperature -25 … +50 °C Standards and specifications Standards/specifications EN 61010-2-201EN 61810-1EN 61373UL 508 (max. 40 °C)DNV Basic relay WAGO Basic Relay 788-174 Commercial data Product Group 6 (Interface Electronics) eCl@ss 10.0 27-37-16-01 eCl@ss 9.0 27-37-16-01 ETIM 8.0 EC001437 ETIM 7.0 EC001437 PU (SPU) 20 (1) pcs Packaging type box Country of origin DE GTIN 4045454389505 Customs tariff number 8536490075