JL Audio MM105 + XDM1000/5 + 2 Pairs M6-650X-S-GMTI-i + M6-10IB-S-GMTI-i4 + MLC-RW Marine Bundle

JL Audio MM105 Marine Digital Media Stereo Receiver + JL Audio XDM1000/5 5-Channel Class D Car and Marine Amplifier + x2 Pairs JL Audio M6-650X-S-GMTI-i 6.5" Marine Speakers with Gunmetal Gray Sports Grilles with LEDs + JL Audio M6-10IB-S-GMTI-i4 10" 4-Ohm Marine Subwoofer with Gunmetal Gray Grille with LEDs + JL Audio MLC-RW Marine Bundle Source Unit Highlights With the MediaMaster® 105, a Premium Source Unit designed to withstand anything Mother Nature can dish out. This source unit delivers top-flight sound performance and advanced audio features specifically designed for marine and powersports applications. Its rugged, weatherproof (IP67 rated) chassis houses an ultra-bright, 3.5-inch full-color LCD display, with separate Day / Night lighting themes for outstanding visibility, even in bright sunshine. When in motion, you will also appreciate the clean user interface with big text and large backlit controls. Injection-molded mica-filled polypropylene cone bodies with synthetic rubber surrounds, specifically formulated with UV inhibitors for marine duty. Marine-grade, synthetic fiber spiders with progressive roll designs to withstand high humidity. Specifically engineered polymer baskets are corrosion and UV-resistant and encapsulate the woofer's motor system to prevent corrosion. Gold-plated, marine-grade brass connection terminals Marine-grade stainless steel mounting hardware is included. Source Unit Features Input Operating Voltage 10 - 15.9 VDC Standby Current Draw 120 mA Operating Current Draw 1.5 A Recommended Fuse Value 5 A Remote Turn-on Capacity 500 mA (max) Operating Temperature Range -4 F to +158 F (-20 C to +70 C) Display Size / Type 3.5-inch / TFT LCD backlighted Display Resolution 320 x 480 Output Channels One stereo pair and mono subwoofer RCA plugs per zone Output Zones Relative, Absolute, Fixed or Off Maximum Output Voltage 4V RMS (Relative or Absolute), Selectable 4V/2V/1V RMS (Fixed Source Unit Specifications  Tuner FM Tuner with RDS 87.5 MHz to 107.9 MHz (0.2 MHz step) AM Tuner 530 kHz to 1710 kHz (10 kHz step) DAB+ Tuner 170 MHz to 230 MHz Favorites 24 presets across all tuners  Bluetooth® Profile A2DP v1.2, AVRCP v1.4 Core Specification Version 2.1 + EDR Codec SBC, Qualcomm® aptX™ audio Connection Range Up to 35 ft / 11 m  USB Interface USB 2.0 host Maximum Current Output USB1: 1 A / USB2: 500 mA Supported Audio Formats MP3, MP4, WAV, AAC, M4A, M4B Apple Compatibility iPhone 5 or beyond (functionality contingent upon compatible iOS release) Source Unit Physical Specifications Height (H) 3.91 in / 99 mm Width (W) 5.95 in / 151 mm Depth (D1) 2.56 in / 65 mm Depth (D2) 3.94 in / 100 mm Mounting Hole Height (A) 3.27 in / 83 mm Mounting Hole Width (B) 4.72 in / 120 mm Amp Highlights 5-Channel Class D Car/Marine System Amplifier, 100 W x 4 @ 2 Ω + 600 W x 1 @ 2 Ω - 14.4V The XDM1000/5 delivers up to 1000 W of clean power and is ideal for an audiophile-grade, subwoofer + four satellite system. With this potent powerhouse, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 Ω), while also generating a stout 600 W of power for a subwoofer system. The technology that makes this much power possible in such a small chassis is our high-speed NexD™ switching amplifier design. Suitable for car or boat installations, the XDM1000/5 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades. The XDM1000/5 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the subwoofer channel directly from the driver's seat or helm. Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access. Amp Signal Processing Rated Continuous (RMS) Power @ 14.4 V Main Channels @ 4 Ω 75 W RMS x 4 Main Channels @ 2 Ω 100 W RMS x 4 Main Channels - Bridged @ 4Ω 200 W RMS x 2 Subwoofer Channel @ 4 Ω 400 W RMS x 1 Subwoofer Channel @ 3 Ω 500 W RMS x 1 Subwoofer Channel @ 2 Ω 600 W RMS x 1 Subwoofer Channel @ 1.5 Ω N/A   Rated Continuous (RMS) Power @ 12.5 V Main Channels @ 4 Ω 60 W RMS x 4 Main Channels @ 2 Ω 90 W RMS x 4 Main Channels - Bridged @ 4Ω 180 W RMS x 2 Subwoofer Channel @ 4 Ω 360 W RMS x 1 Subwoofer Channel @ 3 Ω 480 W RMS x 1 Subwoofer Channel @ 2 Ω 600 W RMS x 1 Subwoofer Channel @ 1.5 Ω N/A   General Specifications Frequency Response (Main Channels) 12 Hz - 22 kHz (+0, -1dB) Frequency Response (Subwoofer Channel) 10 Hz - 1 kHz (+0, -1dB) S/N Ratio, referred to highest rated power (Main Channels) >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >150 / 50 Hz Damping Factor @ 2 Ω >75 / 50 Hz THD+N @ Rated Power (Main Channels) <1% @ 2 Ω per Ch. THD+N @ Rated Power (Subwoofer Channels) <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 80 A (AFS, AGU or MaxiFuse™)   Signal Processing Filter Mode(s): Channels 1 & 2 (front) High-Pass only Filter Slope(s): Channels 1 & 2 (front) 12 dB/octave Filter Frequency Range: Channels 1 & 2 (front) 50 Hz - 5 kHz Filter Mode(s): Channels 3 & 4 (rear) High-Pass or Bandpass Filter Slope(s): Channels 3 & 4 (rear) 12 dB/octave Filter Frequency Range: Channels 3 & 4 50 Hz - 500 Hz Filter Mode(s): Subwoofer Channel Low-Pass only Filter Slope(s): Subwoofer Channel 12/24 dB/octave Filter Frequency Range: Subwoofer Channel 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Infrasonic Filter: Subwoofer Channel none Remote Level Control Optional HD-RLC or MHD-RLC (water-resistant) Remote Level Modes Sub Ch. or All Channels Channel Input Mode Switch Yes (2/4/6 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A   Physical Specifications Height (H) 2.05 in / 52 mm Width (W) 14.73 in / 374 mm Depth (D) 7.09 in / 180 mm Speaker Highlights 6-1/2" 2-way marine speakers with RGB LED lighting (pair) injection-molded, mica-filled polypropylene woofer with synthetic rubber surround 3/4" silk dome tweeter 2-way crossover attached to the woofer basket UV- and corrosion-resistant polymer baskets and grilles Transflective cones emit even glow when lit, appear silver with lighting off designed for free-air applications (no enclosures needed) power handling: 75 watts RMS (150 watts peak power) frequency response: 55-25,000 Hz sensitivity: 89.5 dB impedance: 4 ohms cutout diameter: 4.979 frame diameter: 6.898 mounting depth: 3.036 warranty: 2 years Speaker Size 6 1/2" Design 2-way Tweeter Design 0.8" Dome Tweeter Composition Treated Silk Woofer Composition Mica-Filled IMPP Woofer Surround Rubber Parts Warranty 2 Years Labor Warranty 2 Years   Speaker Specifications Sensitivity 89.5 dB at 1 watt Frequency Response 55 - 25k Hz Max RMS Power Handling 75 Peak Power Handling (Watts) 150 Impedance (Ohms) 4 Top-mount Depth (Inches) 3 1/16" Subwoofer Highlights  M6 10-inch Marine Subwoofer with Transflective™ LED Lighting for Infinite-Baffle Use (250 W, 4 Ω) - Gunmetal Trim Ring, Titanium Sport Grille With appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels. Purpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system. The M6-10IB is best used with amplifier power in the 75W - 250W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead. Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment. Subwoofer General Specifications  Continuous Power Handling (RMS) 250 W Nominal Impedance (Znom) 4 Ω Subwoofer Physical Specifications  Nominal Diameter 10.0 in / 250 mm Overall Diameter (A) 10.75 in / 273 mm Bolt Hole Circle Diameter (B) 9.70 in / 247 mm Frontal Grilles Protrusion* (C) 1.66 in / 42 mm Mounting Hole Diameter (D) 8.875 in / 225 mm Mounting Depth (E) 5.90 in / 150 mm Driver Displacement 0.052 cu ft / 1.47 L Net Weight 8.70 lbs / 3.90 kg *Frontal grille protrusion measured from mounting surface Subwoofer Parameters  Free Air Resonance (Fs) 43.76 Hz Electrical “Q” (Qes) 0.907 Mechanical “Q” (Qms) 11.315 Total Speaker “Q” (Qts) 0.84 Equivalent Compliance (Vas) 0.54 cu ft / 15.29 L One-Way Linear Excursion (Xmax)* 0.52 in / 13.2 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.1 dB SPL Effective Piston Area (Sd) 50.11 sq in / 0.0323 sq m DC Resistance (Re) 4.543 Ω * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”. MLC-RW  The MLC-RW is an advanced controller designed for managing RGB LED lighting circuits. Outfitted with PWM technology and high-capacity circuitry, the MLC-RW produces up to 30 amps (400 watts) of continuous output to power modern, multi-LED networks. All LED functions are easily controlled with the included rotary encoder or using your handheld device via built-in WiFi connection.