Aquatec CDP 8800 Pressure Boost Pump 8852-2P01-V421 160 PSI Bypass, 3/8 JG, 24 VAC

Aquatec 8800 Series Pumps are used in RO systems with flow rates greater than 50 GPD. Reverse osmosis systems require pressure to work properly. A booster pump is suggested for applications where the feed water pressure is low, and where there are high levels of Total Dissolved Solids (TDS) in the water. The 8852-2P01-V421 is designed for operation with a tank shut-off switch (PSW), which shuts off the RO booster pump when the storage tank becomes full. In under-counter RO systems the PSW can be coupled with an Electronic Shut-Off valve (ESO) in order to shut off the feed supply so the system does not waste water.Features: Outstanding toughness, durability EMI/RFI electronic noise suppression Expels trapped air and eliminates "air locks" Pumphead can be mounted up or down Improved venting system removes moisture Corrosion resistant exterior Connections: 3/8" QC Designed for 15,000+ operating hours Outlet pressures up to 125 PSI Extremely quiet operation, less than 52 DBA Runs dry without damage Self-priming, 60 inch lift Low voltage (24V) for maximum safety Pump Certifications: NSF Standard 58 CE Rated: Product has met EU health, safety, and environmental requirements, which ensure consumer safety. Recommend Accessories: 8800 Series Transformer 120V/24VAC (US) - (required) connects pump to electrical outlet to provide power Tank Pressure shut-off switch w/ wire harness - shuts off booster pump when RO tank is full Electronic Shut-off Solenoid (ESO) Valve w/ QC fittings - connects to tank pressure shut-off switch to close off the feed water source when RO tank is full Wire harness assembly - required when using electronic shut-off valve