
Clone Prusa i3 MK3S Printer Full Kit 3D Printer DIY Bear MK3S Including Einsy-Rambo Board Prusa i3 MK3 To MK3S Upgrade Kit
Clone Prusa i3 MK3S Printer Full Kit 3D Printer DIY Bear MK3S Including Einsy-Rambo Board Prusa i3 MK3 To MK3S Upgrade Kit What you will get with this upgrade? NEW FILAMENT SENSOR The previous sensor didn’t work well with some specific filaments. The new sensor is using the optical sensor which is triggered by a simple mechanical lever. This sensor doesn’t care about the optical properties of the filament (it can be completely invisible) and cannot die because of mechanical wear. EASIER SERVICE Thanks to completely reworked extruder you don’t have to take apart the whole extruder if you want to change the nozzle or PTFE tube. As a bonus, the nozzle and the extruder motor is much closer to the X axis, this means less resonance and better prints too. Better Y axis belt tensioning is just the icing on the cake. BETTER COOLING Thanks to the better design of the whole extruder, air flow is increased and as a result, cooling capabilities are improved. We have also focused on cooling of the the printed object and MK2.5S/MK3S is better for printing from flexible materials. Package listing: 1.The kit contains what is in the BOM: V slots 1x331mm + 331mm + 290mm, 2x359mm + 370mm Tee-nuts M5-31x M5*30-16x M5 spring pad-16x M5x8mm low profile screw-4x M5x10mm low profile screw-17x M5x12mm low profile screw-14x Self Tapping Screw M5 - 4x Set screw 4mm M5 - 8x M3x12mm socket head screw (hex) - 10x Zip ties 2.5x100mm -20x 2.Y carriage*1 3.370mm smooth rods*2+330mm smooth rods*2+320mm smooth rods*2 4.MK52 magnetic heated bed*1+steel sheet*1+PEI*2 5.30CM Textile Sleeve Cable Wire*1 6.Motor kit-Nema 17 stepper motor and z axis 320mm motor 7.IR filament sensor + cable(SET) 8.power panice with cable and switch*1 9.P.I.N.D.A V2 *1 10.power supply*1 11.Stainless Steel U-bolts*3 12.LM8UU*10 13.Antivibration Feet*4 14.4010 FAN*1 15.5015 FAN*1 16.HeatSink Extruder Radiator Kit*1 17.50CM Textile Sleeve Cable Wire*1 18.HT-NTC100K Thermistor Temperature Sensor 1m *1 19.24V 50W Ceramic Cartridge Heater 1M*1 20.1 M PTFE Tube Teflonto 21.drive gear extruder kit 22.2m belt with 2pcs pulley 23.623h*2 24.aluminum spacer*9 25. 1set the whole screw nut kit 26. 1M*PTFE tube 27. Einsy board+1*2004LCD Attension: Don't including Printed parts You can print it by the link: https://github.com/gregsaun/prusa_i3_bear_upgrade/tree/master/full_upgrade/for_mk3/printed_parts/stl Buyers are requested to solve the customs clearance problem themselves. If they return due to customs clearance, all the costs incurred will be borne by the buyer. If you need help, please contact customer service before placing an order.