Smart Fingerprint Padlock Keyless Anti Theft Security Lock

Feel SECURE! With a Smart Fingerprint Padlock !NO KEYS, NO APPs   You can take the Light Weigh Smart Mini fingerprint padlock anywhere!  Bid farewell to passwords, combinations, your finger is the key! 0.2 Second Quick Unlock 1000 Unlocks on full charge Store 10 Fingerprints Waterproof and can be used outdoors USB charging port, charging time 1-2 hours Note: The working temperature of the padlock fingerprint is -4℉ ~ 158℉ (-20℃ ~ 70℃), the standby time 6 months, and it can be used 1000 times after being fully charged. SPECIFICATIONS Material: Zinc Alloy Color: Black, Red Size: 70 X 23mm (2.76"X0.91"inches)Net weight: 60g Unlocking Method: Fingerprint Unlocking Fingerprint Capacity: 10 Fingerprints Charging Time: 1-2 Hours Charging Interface: Micro USB cable (not included) Full Power Unlock Times: 1000 Times Maximum Standby Time: 6 Months Power Supply: 3.7V 110mAh Lithium Battery (Shipped with Built-in Battery) Input Voltage: DC5V 200mA Operating Temperature: -20-70℃ Package List: 1 x Fingerprint Padlock First registration administrator fingerprint:Press and hold the fingerprint sensor for 5 seconds and release it when the blue light is on;After releasing, the green light flashes and waits for fingerprint input;Press the same fingerprint continuously for more than 5 times. When the red light flashes, the registration fails. When the green light is on for a long time, the entry is successful.Fingerprint entry of No. 2 ~ No. 10:Adding and entering a new fingerprint requires the fingerprint authorization of the administrator. The second entered fingerprint is also the administrator, and the third to tenth are ordinary users.Press and hold the fingerprint sensor for 5 seconds and release it when the blue light is on;After release, the blue light will be on for a long time to quickly verify the administrator's fingerprint;When the fingerprint verification of the administrator fails, the red light flashes, the fingerprint cannot be entered, and the administrator can continue to be verified;When the administrator's fingerprint verification is successful, the green light flashes, and other fingerprints can be entered continuously;Press the same fingerprint continuously for more than 5 times. When the red light flashes, the registration fails. When the green light is on for a long time, the entry is successful.Restore factory settings:Deleting fingerprints requires the administrator's fingerprint to authorize:1. Press the fingerprint sensor for 8 seconds until the blue light flashes and goes out, the red light is on, and the administrator fingerprint is quickly verified;2. When the administrator fingerprint verification fails, the red light flashes and the fingerprint deletion fails;3. When the administrator fingerprint verification is successful, the green light flashes and all fingerprints are deleted (reset to factory settings).Charging / emergency charging:After the low power prompt, please charge as soon as possible. If the power is too low to unlock, you can power on the bottom micro USB to unlockNotice:1. This product uses Micro-USB interface for charging, please fully charge it before use.2. This product supports the entry of 10 fingerprints; 1~2 are administrator fingerprints, and 3~10 are ordinary user fingerprints.3. This product restores the factory settings state, the fingerprint is cleared, including the fingerprints of the administrator and ordinary users are deleted.4. The factory defaults to the factory setting mode of this product, and any fingerprint can be unlocked.Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-2cm measuring deviation due to manual measurement.