Encoder Boards with dedicated CPU

Add Encoders to your sim experience! Many joystick controllers (including ours) do not include encoder support. Most joystick controllers cannot reliably service encoders, because they are busy servicing all the other inputs that they can miss pulses from your encoder. Also, they can be difficult to configure, and you don't always have control over which pins can be used.Avoid all that mess by including our encoder boards into your cockpit! Our encoder boards have their own built-in CPU... all you need is to supply power, and our board translates the encoder pulses into Clockwise and Counter-Clockwise rotation. The board pulls the outputs low for 50 milliseconds, simulating a momentary button press on the digital joystick input of your choice. A connection is even provided for the switch output, if the encoder has one.***NOTE***These boards are designed for use with controllers that use common-ground (connect the input to GND to activate). They will not work with common-high boards suc