Magewell USB Capture AIO
Product Features | Technical Specs | Drivers and Software | Product PDF Magewell USB Capture AIO Single channel HD capture box Captures any one of the following: SDI + embedded audio + analog audio HDMI + embedded audio + analog audio DVI + audio VGA + audio Component + audio Composite + audio S-video + audio Requires USB 3.0 Port (or USB 2.0 for reduced capabilities) The Magewell USB Capture All-In-One (AIO) provides HD video capture from a single video input source using a wide range of common cable connection formats, all from a single USB connection. Interface: Features: Magewell - USB Capture AIO - Technical Specs: Supported OS Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64) Linux (Ubuntu 12.04–16.10, CentOS 7) OS X 10.9–10.11 macOS 10.12 Supported APIs Windows DirectShow Wave API/DirectSound/WASAPI Linux V4L2 ALSA OS X/macOS QuickTime AV Foundation Supported Software VLC VirtualDub OBS XSplit vMix VidBlaster Wirecast Microsoft Media Encoder Adobe Flash Media Encoder Any other DirectShow, V4L2, QuickTime,AV Foundation based encoding or streaming software Input Interfaces DVI-I DVI 1.0 HDMI 1.4a (via breakout cable) VGA (via DVI-to-VGA convertor) Component (via breakout cable) DB9 YC (S-Video) Composite video Analog audio (L+R) Component video BNC SD/HD/3G SDI Host Interfaces USB 3.0 compatible with USB 2.0 compatible with USB 3.1 Gen 1 Input Features Auto scan of video input sources when there is no signal input to the currently selected input source Manual selection of video input source Auto selection of linked (embedded) audio input source when the video input source changes Manual selection of audio input source Support for input video resolutions up to 2048×2160 VGA & Component Specific Features 12-bitADC Support for RGB & YCbCr (YUV) color formats Support for ‘Seperated sync’, ‘Composite sync’, ‘Sync-on-green’ (SOG), ‘Sync-on-luminance’ (SOY) Support for DMT, CEA, CVT, GTF video timings Input signals up to 165MHz pixel rate are digitized with 1:1 sampling Input signals over 165MHz pixel rate can be digitized with horizontal sub-sampling (resulting in some image quality loss – NOT recommended) Auto detection of RGB & YCbCr color formats Auto or manual sampling phase adjustment Auto horizontal alignment Support for customized video timings Support for customized video resolutions for CVT/GTF timings HDMI Specific Features 225MHz HDMIreceiver Adaptive HDMI equalizer support for cables lengths up to 30M Support for customized EDID Support for extraction ofAVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames Full colorimetry support Support for 8/10/12-bit color depths Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling Support for up to 2-channel IEC60958 audio streams Support for extraction of audio formation information & channel status data Support for extraction of video timing information Support for extraction of 3D format information Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode SDI Specific Features Integrated cable equalizer supporting cable lengths up to 230M for HD-SDI signals Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS standards Support for 2K (2048×1080) mode Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling Support for 10/12-bit color depth Support for extraction of SMPTE 352 payload identifier Support for up to 8 (mono) audio channels at 48KHz Support for extraction of audio formation information & channel status data Limited support of 3Gb-DS: only the first stream can be captured Limited support for capture of the first link of dual link interfaces: YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60 YCbCr 4:4:4 10-bit: captured as 4:2:2 RGB 4:4:4: R/B sub-sampled YC & Composite Specific Features 12-bit ADC Support for NTSC, PAL and SECAM standards Auto detection of video input standard Analog Audio Features Capture analog audio via 3.5 mm unbalanced Line In interface Video Capture Formats Support for capture resolutions up to 2048×2160 Support for capture frame rates up to 120fps (Actual capture frame rate can be limited by the USB bandwidth and internal working frequency. Typical capture frame rates on the Intel USB 3.0 controller are as follows.) 1920×1080 YUY2 (up to 75fps) 1920×1080 RGB24 (up to 60fps) Support for 4:2:2 8-bit capture format: YUY2, UYVY Support for 4:4:4 8-bit capture format: RGB24, RGB32 The default capture format is YUY2. More capture format can be set using USB Capture Utility Video Processing Features Video processing pipelines with 160 Mpixels/s processing bandwidth Video cropping Video scaling Video de-interlacing Weave Blend top & bottom field Top field only Bottom field only Video aspect ratio conversion Auto or manual selection of input aspect ratio Auto or manual selection of capture aspect ratio Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox) Video color format conversion Auto or manual selection of input color format & quantization range Auto or manual selection of capture color format, quantization range & saturation range Support for RGB, YCbCr 601, YCbCr 709 color formats Support for Limited or Full quantization range Support for Limited, Full & ‘Extended gamut’ saturation range Video frame rate conversion Vertical flip and mirror Multiple devices on one computer Support for connecting multiple USB devices to one system Support for setting the device serial number as the device name shown in the system using USB Capture Utility SDK The USB Capture SDK provide functions including signal status extraction, capture configuration, etc. Firmware Upgrade Multiple devices in one system can be upgraded simultaneously LED Indicator Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed. Form Factor 98mm (L) x 98mm (W) x 25mm (H) Accessories USB 3.0 cable DVI to VGA connector DVI-I to HDMI + Component breakout DB9 to YC + Composite + Analog Audio + Componentbreakout Power Consumption 5V max current: ~1 A max power consumption： ~5 W Working Environment Operating temperature: 0 to 45 deg C Storage temperature: –20 to 70 deg C Relative Humidity: 5% to 90% non-condensing If you intend to use multiple Magewell USB Capture devices on a single system, please verify that your system will be able to support this!