HYDROS Calibration Solutions

  Product Highlights Calibration is an important step in keeping your equipment functioning properly. We recommend using at least two points of calibration on a monthly basis to allow the sensors to provide the most accurate reading possible. Using 4.01 and 7.01 single use packets achieves this calibration process. It is helpful to order enough packets to get through 6 months of calibration. Calibration packets can be stored in a cool dry area for up to 1 year. Description To calibrate your Hydros1. Remove the probe element from the water2. Clean off any algae and bioslime using a soft cloth3. Rinse with clean, fresh water4. Open the 4.01 solution and insert the probe into the packet5. Wait until the pH displays 4.01 on the Hydros App6. Once that is completed remove from packet, rinse with clean fresh water7. Open the 7.01 solution and insert the probe into the packet 8. Wait until the pH displays 7.01 on the Hydros App9. Return the probe into the reservoir being monitored10. Discard the packets in a trash can. Calibration packets can be stored in a cool dry area for up to 1 year. We recommend using multiple points of calibration to allow the sensor to provide the most accurate reading possible.