Renogy 2000W 12V Pure Sine Wave Inverter Charger w/ LCD Display

Renogy 2000W 12V Pure Sine Wave Inverter Charger w/ LCD Display The Renogy 2000W Pure Sine Wave Inverter Charger w/ LCD Display is ideal for RV or standalone. The Renogy 2000W Pure Sine Wave Inverter Charger not only acts as a DC to AC inverter that allows you to power your household appliances but also charges and maintains a battery bank when connected to shore power and is now compatible with Lithium batteries. With a low transfer time, power remains uninterrupted when switching from the battery to shore power. The advanced Renogy Pure Sine Wave technology will protect and extend the life of your electronics and appliances. The Renogy 2000W Pure Sine Wave Inverter Charger is a perfect backup power source! Please Note: The listed dimensions we provide are solely the device body dimensions. Please do reserve space for cable grommets and installing cables. COMPATIBLE WITH VARIOUS BATTERIES Powerful versatility, it is ready for 12V Gel, AGM, Sealed Lead Acid (SLA), Flooded (FLD), Calcium (CAL), Lithium-iron Phosphate (LI), and programmable for custom batteries through the USER type. PROTECT YOUR ELECTRONICS Advanced Pure Sine Wave technology provides high-quality AC power equivalent to grid power to protect your household appliances and electronic equipment, which is especially suitable for sensitive electrical appliances. 4-STAGE CHARGING The Renogy 3000W pure sine wave inverter charger is equipped with a 4-Stage(Bulk stage, Boost stage, Float stage, and Equalization) battery charger with a configurable charging current between 5A and 75A to make sure it optimally and automatically charge to 100%. It only takes 1.5 hours to fully charge a 100Ah battery. LCD DISPLAY PANEL The LCD display can visually see the status of the inverter and perform programmable operations. The PCL inverter charger series is fully programmable with more than 20 features that can be customized such as input/output voltage range and battery charging current. EASY TO USE This inverter comes with a 16.4ft remote control and a 9.9ft battery temperature sensor. The Temperature Sensor can compensate the battery voltage affected by temperature so that the charger recognizes the voltage more accurately and assures stable and constant charging to the battery. Perfect with Renogy 200Ah LFP BT Battery Renogy 200Ah LFP BT Battery works perfectly with the Renogy 2000W 12V Pure Sine Wave Inverter. The bundle is perfect for off-grid systems, whether for a van, semi-truck, 5th wheel, cabin, or any remote location needing power. The built-in Bluetooth module enables remote monitoring on mobile devices in real time. This creates clean and silent energy without having to worry about losing access to connected devices and appliances. Recommended Bundle with renogy one The bundle is perfect for off-grid systems, whether for a van, semi-truck, 5th wheel, cabin, or any remote location needing power. Add Renogy ONE M1 to achieve smart energy monitoring with intuitive visuals and real-time data. This all-in-one display provides you access to accurate energy system data anywhere, anytime via the DC Home app. MAIN PANEL DISPLAY To Access the main panel, unscrew the terminals on the outside of the side panel. Steps as follows: 1. Flip inverter power to the 'OFF' position 2. Unscrew the screw terminals along the edge of the side plate 3. Gently remove DC Side plate to expose DC Terminals 4. Connect the positive and negative DC Cables to their respective terminals and run them through the side panel INVERTER SPECIFICATIONS Continuous Power: 2000W AC Output Voltage Range: 100~120VAC configurable, 5V interval DC Input Voltage Range: 10~16 VDC Nominal Efficiency: > 90% Peak Surge Power (1 second): 6000W Output Frequency (Nominal): 50/60 Hz Output Waveform: Pure Sine Wave No Load Power Consumption: Normal: <20W; Power Saving: <15W   CHARGER SPECIFICATIONS Output Current: 5-65A configurable, 5A intervals Nominal Input Voltage: 120VAC Input Frenquency Range: 40Hz - 70Hz Optimal Efficiency: >85% Input Voltage Range: 90-138 VAC Input Wave Form: Sine Wave (Utility or Generator) TRANSFERSWITCH SPECIFICATIONS Transfer Time: ~ 10ms Transfer Rating: 30A Automatic Transfer Switch GENERAL SPECIFICATIONS Battery Types: GEL, AGM, SLA, FLD, CAL, LI, USER Operating Temperature: 0 ~ 40°C / 32 ~ 104°F Storage Temperature: -30 ~ 70°C / -22 ~ 158°F Humidity: 0% ~ 95% Noise: <50dB Dimensions: 20.1 x 11.2 x 7.6 in / 510 x 285 x 193 mm Weight: 51.1 lbs / 23.2 Kg WARRANTY INFORMATION Inverters: 1-year material and workmanship warranty Accessories: 1-year material warranty