Audio Technica AT-VM95E Dual Moving Magnet Cartridge
This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridges special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. Features VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus Aluminum cantilever Specially wound coils increase output voltage Durable low-resonance polymer housing Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws no nuts required Compatible with any AT-VMN95 replacement stylus Technical Specifications Frequency Response 20-22,000 Hz Channel Separation 20 (dB at 1 kHz) Vertical Tracking Angle 23° Vertical Tracking Force 1.8-2.2 g (2.0 g standard) Stylus Construction Bonded round shank Recommended Load Impedance 47,000 ohms Coil Impedance 3.3 k ohms (1 kHz) DC Resistance 485 ohms Coil Inductance 550 mH (1 kHz) Load Capacitance 100 to 200 pF Output 4.0 mV (1 kHz, 5 cm/sec.) Channel Balance 2.0 dB (1 kHz) Stylus Shape 0.3 x 0.7 mil elliptical Cantilever Aluminum pipe Mount Half-inch Weight 6.1 g (0.22 oz) Dimensions 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D Replacement Stylus AT-VMN95E Accessories Included Two 11 mm installation screws, two 8 mm installation screws, two washers