Neutrino® IS Series - SX8 - Continuous Zoom 30-300mm - f/3.0

The ITAR-free Neutrino IS series combines Teledyne FLIR’s world-class mid-wavelength infrared (MWIR) OEM camera modules and continuous zoom (CZ) lenses to offer high–performance imaging solutions with various FPA resolutions and CZ zoom/FOV ranges. Neutrino IS lowers development and manufacturing risk and improves time-to-market. Cutting-edge HOT FPAs, long life and low vibration linear coolers, common camera interfaces, and fully athermalized lenses make for the best-in-class solution. Each camera module and lens are designed for each other, providing optimal performance not achievable when buying and integrating cameras and lenses from multiple sources.Teledyne FLIR Neutrino IS series is simply the best technical solution available. With nearly off-the-shelf delivery, industry-leading two-year warranty, real price competitiveness and well-known product support and product reliability, it offers the lowest risk solution. The Neutrino IS is an OEM camera module that is intended to be integrated into a higher level system. Multiple MWIR Imaging Solutions Multiple configurations from one manufacturer simplifies product development and production, providing higher value and lower risk. Seamless Opto-Mechanical Integration Cameras and lenses designed for each other for optimum performance and compatibility. Market Leading MWIR CZ Optics and Cameras World class performance, industry-leading two-year warranty, and affordable MWIR solutions from the market leader.   Lens Coating DLC - With DLC front coating, lens to withstand humidity, severe abrasion, and salt fog exposure Specifications Resolution 1280 x 1024, (8 µm pitch) HOT MWIR FPA - Digital Video Display Format 1280 x 1024 Sensitivity [NEdT] <35mK Spectral Band 3.4 - 5.1 µm Standard Imaging & Optical CMOS CMOS (16-bit, 16-bit color encoded YCbCr, 8-bit) Color Palettes  Yes Detection Recognition and Identification  D = 23 km, R = 10.5 km, I = 8.3 km The ranges at which there is a 50% probability of achieving the task for the V50 measured task of difficulties of 2.0 (detection), 9.0 (recognition), and 13.0 (identification). Digital Zoom Yes Discrete I/O Controls Available None f-number f/3 FPA - Digital Video Display Format 1280 x 1024 Frame Rate 60Hz, adjustable 1Hz to 60 Hz Horizontal Field of View [HFOV] 1.9° to 19.4° (actively athermalized over the operating temperature range) Image Optimization Linear, Histogram Equalization, DDE+ Invert/Revert Yes Polarity Control [black hot & white hot] No Resolution 1280 x 1024, (8 µm pitch) HOT MWIR Sensitivity [NEdT] <35mK Special Features Active athermalization and auto focus capable Spectral Band 3.4 - 5.1 µm Standard Symbology Yes Zoom and Focus Controls Yes Connections & Communications Analog Video Output No Communication Protocol RS-422, nominal 115,200 baud (lens) Digital Output Format Yes, accessory board required Primary Electrical Connector 80-pin SAMTEC, ST4-40-2.50-L-D-P-TR RS-232 Compatible Communication     Yes User Configurability via SDK & GUI     Yes, Camera only FPA Control Direct Injection Snapshot Prog operation Yes Programmable Integration Time Yes (0.01 ms - 16.6 ms) ROIC ISC1601 ROIC Modes Free run, readout & integration priority Electrical Input Voltage Camera Only 5.0 - 12.0 VDC (camera), 12 VDC (cryocooler), 12 VDC (lens) Camera & Lens 4.75 - 6.0 VDC (camera), 9 - 35 VDC (cryocooler) Power Consumption Camera Only Camera steady state is <6.0W (roomtemp) Lens steady state is <2.4W (roomtemp) Cooler steady state is <3.0W (roomtemp) Camera & Lens 9.0W (camera + cooler) + 2.4W (lens) = <11.4W total at room temperature Mechanical Size (L x W x H) 18.5 x 11.9 x 16.3 cm (7.3 x 4.7 x 6.4 in) Weight 1790 grams Environmental & Approvals Humidity 5% to 95% non-condensing Non-Operating Temperature Range -57° C to + 80° C Operating Temperature Range -30° C to + 70° C, note this is limited by the lens Operational Altitude 12km altitude equivalent Shock 10g w/11ms half-sine pulse, 3-axis Vibration 5.8 grms, 3-axis, 1hr each   Important Notes  Your Neutrino may look different than pictured. All international customers that are ordering any Thermal Imaging Camera will be required to fill out an End Use Statement document before shipment. Once you place your order we will send you an email with the documents. Export Information ECCN 60Hz: 6A003.b.4.a HTSUS: 9013.80.9100 Country of Origin: USA   🕑Lead Time🕑 Contact us for lead time sales@groupgets.com .quantityandbackorder { display:none; }