HALJIA BMI160 Module 6DOF 6 - Axis Rate Angular Velocity Gyroscope + Gravity Acceleration Sensor 6-axis Inertial Motion Sensor - Purple

Description: The BMI160 6-axis inertial motion sensor is packaged in a MEMS sensor and integrates a 16-bit 3-axis accelerometer and an ultra-low power 3-axis gyroscope. The module can output acceleration data (acceleration value detected by the device in the X, Y, and Z axis directions) and gyroscope data (speed of the device rotating around the X, Y, and Z axes). When the accelerometer and gyroscope are running in full-speed mode, the typical power consumption is as low as 950μA, which is only 50% or less of the power consumption of similar products on the market.BMI160 is specially designed for smart phones, tablets, and wearable devices. It has a built-in smart pedometer algorithm and can directly read the number of steps through a register. The built-in 3-axis acceleration and 3-axis gyroscope can realize running, fitness and other sports detection. The module has a built-in LDO power management chip, VIN supports 3.2~6V wide voltage power supply, and also has a separate 3.3V interface, which is compatible with Arduino 3.3V and 5V controller direct drive.Application scenario:1. Walking pedometer 2. Acceleration detection 3. Inclination measurement4. Display switch between horizontal 5. Vertical screen modeTechnical specifications:Working voltage: 3.2V~6VCurrent consumption: <1mAInterface mode: 2.54 pitch pin headerOptional scale for acceleration: ±2g/±4g/±8g/±16gOptional gyroscope scale: ±125°/s, ±250°/s, ±500°/s, ±1000°/s, ±2000°/sAccelerometer zero drift: ±40mgGyroscope zero drift: ±10°/sProgrammable frequency: 25/32Hz~1600Hz6D detection and positioning16-bit data outputShock resistance: 10,000 gx 200μs2 independent programmable interrupt generatorsBuilt-in 1024 byte FIFOWorking temperature: -40℃~+85℃Board Size: 18× 13 × 2.7mmWeight:1.1gPacking List: 1 × BMI160 Module