Strange Dual Master Cylinder - 1.125" Bore Includes Dust Boot, Pushrod, & Fittings

Application: Vehicles with front and rear manual disc brakes. Normally used with single or two piston calipers in front and four piston in the rear. This is assuming Drag Race brakes as factory calipers may require more fluid volume Brake pressure will be delivered equally out of both ports. Use of an adjustable proportioning valve is highly recommended. Using All Wheel Disc brakesUse 2 lb residual pressure valves if mounted at or below the level of the calipers Using With Drum BrakesAny line supplying drum brakes will require a 10 lb residual pressure valve Recommendation6.5 to 1 pedal ratio NotePort closest to the push-rod flows the most volume of fluidThis port needs to be plumbed to the brakes requiring more capacity Assembly Includes Aluminum Master Cylinder With Plastic Reservoir– 1.125″ bore size– Cast aluminum body anodized for corrosion resistance– Flange for firewall mounting – 21/64″ holes on 3.187″ centers– Provisions for side mounting – .390″ holes on 5 1/2″ centers– 1/