Cantek C12RSH 12" Straight Line Ripsaw
The Cantek C12RSH Straight Line Ripsaw is a single-blade ripsaw geared towards the shop looking to increase efficiency in their ripping operations but can not justify a multi-blade ripsaw. With its precision cast iron chain and track assembly, and extended pressure section, the C12RSH can produce a glue joint finish ready for panel glue-up right out of the saw.• Produces a guaranteed glue joint finish to 10′, which eliminates the need to joint the material after ripping • Precision straight line feeding for parallel and accurate rip cuts • Eight hold down rollers over six rows ensure material is firmly held during cutting operations for a longer period resulting in a straighter, more precise cut. • Maintenance-free chain track with the use of a reliable mechanical lubrication system. • Cast iron saw assembly, column, and table with superior vibration damping properties for optimum cutting results while ensuring long bearing and machine life. • Rigid machine body consists of a thick welded steel frame. • FC35 cast iron chain track with double-V design ensures precision straight-line ripping with a long wear life. • Precision Built Saw Arbor constructed of nickel-chrome steel, large diameter, accurately ground and dynamically balanced. • Arbor runs in precision angular contact type ball bearings (eliminates any radial run-out & axial thrust) – V Belt driven from below. • Mechanical operation Chain Oiler provides consistent lubrication to the chain track and automatically adjusts to your feed speed. • When oil runs low, a warning light will come on, and when it gets too low, the machine track stops running to avoid damage to the track. • Cast iron rip fence is mounted to a large diameter round guide rail with a quick-locking lever for effortless and accurate adjustment. • 3 sets of anti-kickback fingers. 2 top and 1 set in the table for added operator safety. • Soft start – Star Delta starter reduces the amp draw on startup. •Optional laser light to project the cutting line to achieve maximum material yield. Saw arbor diameter 1″ Saw blade diameter 10 – 12″ Saw arbor speed 4500 rpm Feed Speeds – variable 50 to 120 FPM Maximum workpiece thickness 3.34″ (12″ blade) Minimum workpiece length 8″ Glue line guarantee 10’ (+/- 0.0098” or 0.25mm) Distance between saw and column 18″ Arbor motor 15 HP Feed motor 1 HP Electrical 46 amps (230V); 23 amps (460V) Table size 39″ x 57″ Table height 31-7/8″ Dust port size 4″ Net weight 2,090 lbs Machine dimensions 68” x 46” x 62” Shipping weight 2,530 Lbs Shipping dimensions 65″ x 55″ x 60″