HLTNC Servo Stepper Motor Offline Motion Controller Programmable 1/2/3/4 Axis 150KHZ CNC Controller RS485 TC55V USB Engraving Router

1. Product Introduction: TC55V is an upgrading version of TC55. It is equipped with 3.5 inch color screen, RS 485 communication, Chinese/English Switch, and USB connection. Boot picture can be set as pictures or company name as you will. It is highly reliable, highly accurate, low noise and easy to use.Click here to get the electronic manual. 2. Technical Specifications: Model: TC55V Minimum data unit 0.001 mm Maximum data size ± 99999.999mm Maximum Speed: 9000mm/min (pulse is 0.001mm) Maximum pulse output frequency 150KHz Axis 1-4 (X,Y, Z,C) X,Y,Z,C axis can conduct linear interpolation, X,Y can do circular interpolation. Electric Gear: numerator :1-99999 denominator: 1-99999 System main functions are automatic, manual, program editing, system parameters, self-check, settings, etc. Maximum 480 commands each program USB Connection and upgrade Stop and Start of Spindle motor PLC Extension I/O Extension 16 channel 24V(photoelectric isolating)  Input8 channel 24V(Single channel 500mA) Output Self defining of I/O port Chinese/English panel display Free boot picture setting 3. Programming Function Introduction: Programming Code Interpretation Incremental Incremental Programming Absolute Absolute Programming Pause Pause unless certain condition is met, then skip to command called Output Define on and off of output port, ex. Stop and start of spindle motor Repeat Go back to command called and repeat Clockwise Clockwise circular interpolation (Incremental programming) Counter-clockwise Counter Clockwise interpolation(Incremental programming) Delay Define the time of delay Judge Judge if certain condition is met and skip to command called More functions Please read the manual: click to view