HOBBYWING 3in1 3 IN 1 3in 1 Multifunction LCD Program Box program card (Integrated w/ USB adaptor Lipo Voltmeter

HOBBYWING 3in1 3 IN 1 3in 1 Multifunction LCD Program Box program card (Integrated w/ USB adaptor Lipo Voltmeter1 Working Modes1.1 Works as an individual device to set the ESC, the value of each parameter is displayed on the LCD screen.1.2 Works as an USB adapter to link the ESC with a PC to update the firmware of the ESC or set the ESC by HOBBYWING USB LINK SOFTWARE .1.3 Works as a Lipo battery voltmeter to measure the voltage of the whole battery pack or each cell.This Multifunction LCD Program Box is suitable for the following ESC:PLATINUM series helicopter/aircraft ESCXERUN & EZRUN series Car ESC (Version 2.0 and 2.1)XERUN-120A V3 & V3.1 ESCA) The programmable items for the XERUN and EZRUN series car ESC:1 Running Mode2 Drag Brake Force3 Low Voltage Cut-Off Threshold4 Start Mode5 Maximum Brake Force6 Maximum Reverse Force7 Initial Brake Force8 Throttle Neutral Range9 Timing10 Over-Heat Protection11 Motor Rotation12 Lipo Cells Amount*Note: Some speed controllers have less programmable items, but some have more. Please read the user manual of your speed controller to get detail information.B) The programmable items for the PLATINUM series airplane ESC:1 Brake2 Battery Type3 Low Voltage Protection Mode (Cutoff Mode)4 Low Voltage Protection Threshold (Cutoff Threshold)5 Start Mode6 Timing7 Governor Mode8 Reserved Item #19 PWM Frequency10 Built-In BEC Output11 Reserved Item #212 Lipo Cells Amount\ Specifications1 Size: 90mm (L) * 51mm (W) * 17mm (H)2 Weight: 65g3 Input Voltage: 4.5-12.6V(If the ESC hasn't a built-in BEC, you must use an additional battery pack to supply the program box)4 Displayer: 16*2 characters LCD.5 Interface: Mini USB interface, ESC interface (Futaba plug), Power supply interface (Futaba plug)