Radial Engineering McBoost Microphone Signal Intensifier

The Radial Engineering McBoost is a microphone signal booster designed to elevate the output of a dynamic or ribbon microphone for greater transparency and clarity, and provide enough clean gain to connect to any preamp. The Radial McBoost provides clean gain at the source for low-output dynamic and ribbon microphones, driving long cable runs with ease and allowing you to connect to any preamp as if it were a high-gain ribbon mic pre. Simply connect the McBoost in-line using standard XLR cables and activate 48V phantom to provide power, then select between three impedance settings to optimize the response from the microphone. The McBoost will elevate the output to produce added clarity, excitement and extra drive for long cables whether you are in a recording studio, on a live concert stage, or in a broadcast center. Product Specifications: Audio Circuit Type: Class-A Differential DC Coupled FET Frequency Response: <7Hz to >30kHz Dynamic Range: 116dB Gain: +26dB Full Gain, +20dB Half Gain, +4dB to +25dB Variable Gain Clip Level: +16dBu (output) Total Harmonic Distortion: 0.006% Intermodulation Distortion: 0.01% Phase Deviation: <10° Input Impedance: 600Ω / 2.7kΩ / 30kΩ Output Impedance: 220Ω Common Mode Rejection Ratio: >50dB Equivalent Input Noise: -125dBu Noise Floor: -100dBu / -110dBu Input Connectors: XLR female output Output Connectors: XLR male output Construction: Cold Rolled Steel Power: Phantom Power - 48V Conditions: For use in dry locations only between 5°C and 40°C