Waterproof NovaBright D4-WP 4 Channel 20A Flicker Free DMX LED Decoder for 12-36V DC LED Lights 2000HZ PWM

● Waterproof DMX512 decoder with IP67 rating, suitable for outdoor and damp environment.● Complies with the DMX512/RDM standard protocols.● Digital numeric display, set DMX decode start address by buttons.● 1/2/4 DMX channel output selectable.● PWM frequency 2000/500Hz selectable.● Logarithmic or linear dimming curve selectable.● Stand-alone RGB/RGBW mode and 4 channel dimmer mode selectable,which be controlled by buttons with built-in programs, instead of DMX signal.● Over-heat / Over-load / Short circuit protection, recover automatically. ● Enter stand-alone dimmer mode only when DMX signal is disconnected or lost.● Short press MODE key, when display L-1~L-8, enter stand-alone dimmer mode.● Press ◀ or ▶ key to change dimmer mode number(L-1~L-8).● Each dimmer mode can adjust each channel brightness independently. DMX Mode Short press SETUP key to switch between 4 channel(100~1FF, 200~2FF, 300~3FF, 400~4FF).Press ◀ or ▶ key to setup brightness value of each channel.Long press SETUP key for 2s, or timeout 10s, quit setting.Stand-alone dimmer mode(L-1~L-8) Stand-alone RGB/RGBW mode ● Enter stand-alone RGB/RGBW mode only when DMX signal is disconnected or lost.● Short press MODE key, when display P01~P30, enter stand-alone RGB/RGBW mode.● Press ◀ or ▶ key to change dynamic mode number(P01~P30).● Each mode can adjust speed and brightness.Short press SETUP key for switch between mode speed,brightness and W channel brightness setting.Press ◀ or ▶ key to setup value of each item.Mode speed: 1-10 level speed(S-1, S-9, S-F).Mode brightness: 1-10 level brightness(b-1, b-9, b-F).W channel brightness: 0-255 level brightness(400-4FF).Long press SETUP key for 2s, or timeout 10s, quit setting.Speed(8 level)Brightness(10 level,100％)(P01~P30) Stand-alone dimmer mode● Short press MODE key, when display 001~999, enter DMX mode.● Press ◀ or ▶ key to change DMX decode start address(001~999),long press for fast adjustment.● If there is a DMX signal input, will enter DMX mode automatically.● DMX Dimming: Each D4-WP DMX decoder occupy 4 DMX addresswhen connecting the DMX console.For example, the defaulted start address is 1,their corresponding relationship in the form: