KT200 ECU Programmer ChipTuningKit KT200 ECU/TCU programmer Support OBD/BOOT/JTAG/BDM Multiple Protocols

KT200 ECU programmer is used to read and write Engine Control Units (ECU) FLASH and EEPROM in OBD, bench, and boot mode in heavy vehicles, passenger cars, motorcycles, marine and construction vehicles. KT200 ECU Programmer is a complete tool for reading and programming engine control units via OBD and via the Boot mode and Jtag systems. Full system and Bench mode also available.    KT200 ECU Programmer Highlights: 1. KT200 ECU Programmer covering up to 5400 ECU, over 500 TCU. 2. Support Audi/VW ECU Clone via Bench Mode. 3. Support OBD/BENCH/BOOT/BDM/JTAG. 4. Software Version:22.08.20 5. Bosch EDC17, MED17/ME17, and SIEMENS Pcr2.1(with Pinout also nlocking possibility) read and write in Bench Mode. 6. Vehicle list is constantly updated stays ahead of the industry. 7. The KT200 ECU programmer software allows you to forcibly write (forcible clone) without checksumming and supports forcibly reading and writing unknown ECUs with supported chip models. 8. Covering a full range of German, ECU Programmer, Japanese, American and Chinese models. 9. Operation System: Windows 7, Windows 8/8.1, Windows 10, Windows 11, CPU > 2.5 GHz (Intel i5, i7), RAM > 8GB More Details on the official website: http://www.ChipTuningKit.com   KT200 ECU Programmer Device has 2 Version: 1. Auto Version: Car OBD, Truck OBD, Full System, BDM/JTAG, TOOL BOOT, Bench Mode, TCU Gear. 2. Full Version:  Car OBD, Truck OBD,  Full System, BDM/JTAG, TOOL BOOT, Bench Mode, TCU Gear, Tractor OBD, Boat OBD, Motorbike OBD, You can update Auto Version to be Full Version, provide S/N:   ChipTuningKit KT200 ECU Programmer Functions: 1. ECU/TCU clone 2. Read and write ECU data 3. ECU maintenance engineering 4. Full read and write ECU/TCU data 5. OBD2 reading(Currently only supports 2008-2020 vehicles, ) 6. Checksum correction 7. Read and write Virtual data  8. Supports online update  9. Full read and write TCU (Micro+EEPROM) 10. Must work online (access online server) Notion: 1. Please close the anti-virus program before you running the KT200 software, it may incorrectly identify the software as harmful and break it. 2. Please connect to the Internet to work with KT200 software, otherwise, it will not work. 3. We provide the following items: DTC code Removal EGR & DPF Removal, IMMO OFF, releasing speed limit, mileage correction, Hot start or Cold Start Vmax, and so on.   Downloads: ChipTuningKit KT200 ECU Programmer User Manual ChipTuningKit KT200 ECU Programmer Support ECU List  ChipTuningKit KT200 ECU Programmer Support TCU List ChipTuningKit KT200 ECU Programmer Software V22.08.20 Get Free VR file in this Software ECUHelp KT200 ECU Programmer Multiple connection possibilities:   JTAG CONNECTION:   BENCH MODE EDC16/ME9/EDC7:   BDM  CONNECTION:   BOOT MODE CONNECTION: BENCH CONNECTION WITH AUTOMATIC GEARBOX: Professional software for reading and programming the control units of: CAR TRUCK MOTORBIKE TRACTOR BOAT Additional TCU package is available for Automatic Transmission.    FULL READ AND WRITE VIA PIN OUT IN BENCH MODE: BOSCH EDC7 BOSCH EDC16 BOSCH ME9/MED9   FULL READ AND WRITE VIA PIN OUT IN BENCH MODE: BOSCH MD1 BOSCH MG1 FREESCALESPC5777 AURIXTC29x STSPC58   FULL READ AND WRITE VIA PIN OUT IN BENCH MODE:  BOSCH EDC17 BOSCH MED17/ME17 SIEMENS PCR2.1 (Unlocking also possible via pinout)   FULL SYSTEM VIA PIN OUT (MICRO/FLASH+EEPROM) OF ECUs: BOSCH CONTINENTAL DELCO DENSO MARELLI SIEMENS TEMIC TEMIC   BDM EJTAG MODES FOR: BDM MPC55x BDM MPC56x BDM MC32/ZC32 BDM HC12/S12x JTAG NEXUS MPC/SPC56xx JTAG NEXUS MPC55xx   JTAG RENESAS SH7055 SH7058 SH7059 SH7251 SH72543 SH72544   JTAG NEC76F00xx 76F0038AGD 76F0038GD 76F0039AGD 76F0039GD 76F0040GD 76F0070 76F0070 76F0085   BOOT MODES: BOOT MODE C16729Fxxx BOOT MODE STK-LINE/RX-TX/CAN  ST10F168 ST10F269 ST10F273 ST10F275 ST10F276 ST10F276 ST10F280 ST10F296   BOOT MODE Tricore for micro  TC1724 TC1728 TC1738 TC1738 TC1762 TC1766 TC1767 TC1782 TC1791 TC1792 TC1793 TC1793 TC1796 TC1797   SBOOT MODE Renesas H7052 SH7054 SH7055 SH7055 SH7058 SH7059 SH7251 SH72543 SH72544   BOOT MODE Mitsubishi MH7202 MH7203 MH8102F MH8105F MH8106F MH8202 MH8206F MH8301F MH8301F MH8304F MH8405F BOOT BAM SYSTEM MOTOROLA  SPC5674 SPC5777 BOOT MODE Fujitsu BOOT MODE Hitachi ADDITIONAL PACKAGE FOR AUTO MATIC TRANSMISSION FULL READ AND WRIT ETCU (MICRO+EEPROM) TCU CLONING TCU CODING FUNCTIONS    KT200 ECU Programmer Packing List:  Master x 1, BENCH BOX x1, OBD wires x 2, pinout line x 1, BOM adapter x4, Transfer cables x 3, Power wire x 4, Set of resistors x1, Adapter plugs x 4 sets, Power adapters x 5 sets. Software(Optional): Auto Version/Full Configuration Software