KYDZ Smart Key Programmer Android Handheld Supports Remote Test Frequency-Refresh Generate Chip Recognition-Smart Card Generate

KYDZ Smart Key Programmer Android Handheld Supports Remote Test Frequency-Refresh Generate Chip Recognition-Smart Card Generate YDZ Smart Key Programmer Work on Android Supports Remote Test Frequency-Refresh Generate Chip Recognition-Smart Card Generate   KYDZ Smart Key Programmer Functions: 1. Chip Identification, Copy and Generation2. Anti-theft Data write Key3. Remote Generation4. Support Frequency Detection, Infrared Detection5. NXP Renew6. Smart Card Generation  Power On and Off:1.Power on: press the battery button in 3 to 5 seconds, entering the Android screen, then click the “agree”.2.Power off: press the battery button in 2 to 3 seconds,appearing the word “power off”, then click the “power off”.  Home Page Description:1. Active message showing: show the new message of KYDZ2. Remote making: producing the RKE remote key.3. Detecting the frequency and infrared.4. NXP renew: OEM and after market is supported.5. Chip identify:recognize the chip,edit,read the EEPROM.6. Copy:(still research and develop).7. Special function:(still research and develop).8. Smart card:producing all kinds of PKE remote keys.9. Making chip:G make,G mass,ID67,ID68,ID70,ID70E,ID33,ID40,ID4, ID42,ID43,ID44,ID45,ID46,ID60,ID61,ID62,ID63 and so on.10. Setting: wifi setting,display setting, volume setting, language setting, PC mode. Using Instruction: 1. Remote MakingPlease check if the battery of the RKE remote key can work before making, then clicking the “remote make”-----choose the area----choose the type of car----enter the screen of remote make----put the RKE remote key into the Key slot----appear the word “connect the remote key”----click generate---remote making-----read successful----confirm. 2. Detecting Frequency (1)Detecting Frequency: click “frequency”-----put the remote key near this machine----press the button of the remote key----appearing relative information of the key.(2)Detecting Infrared:click “frequency”-----put the remote key near this machine----press the button of the remote key----appearing information. 3. NXP RenewClick“NXP renew"----choose the area----choose the type of the car-----enter the screen and connect the circuit-----use the PS2 wire to connect the port of the PS2--------click “refresh/update”-------reading the chip------read successful----click “confirm” 4. Chip Identity (1)Click “chip identity”-----put the chip into the Key slot----click chip identify-----recognizing----finished----showing the information of chip---click “chip edit”(2)Click “chip identity”-----out the chip into the key slot------click “EEPROM”----click “read the data of EEPROM” 5. Copy:(still research and develop).6. Special function:(still research and develop).7. Smart CardPlease check if the battery of the RKE remote key can work before making, then clicking the “remote make”-----choose the area----choose the type of car----enter the screen of remote make---read PKE remote key---adjust it until it display the “PKE remote key”----click “generate”--confirm 8. Making Chip(1)Car model:put the chip into the key slot----click “make chip”----car model----choose the area----choose the type of the car----click “Importing files”---confirm----back to the last interface---click “generate”--confirm(2)Image generator：put the chip into the key slot----click “make chip”---click “image generator”---choose G producing as your need.(3)Unlock: put the chip into the key slot-----click “make chip”-----click “unlock”----choose the area----the the type of the car--- detecting the battery---detecting the data of the factory----reset the chip. 9. Setting (1)WIFI setting: click “setting”---click “wifi setting”----choose the internet------connect(2)display setting:click “setting”---click “display setting”----adjust the light of the screen as you want(3) volume setting:click “setting”---click “volume setting”----adjust the volume of the screen as you want(4)language setting:click “setting”---English/Chinese(5)PC mode:connect to the computer(6)About: showing the version of this machine Product Parameter 1.Size: 5.0 inch2.Battery: 5000mAh/3.7V3.Charging: DC 5V/1A4.Using environment: -10°C---55°C Package includes:1set x KYDZ Smart Key Programmer   Contact InformationWhatsapp: +86 136 1282 7578Email: info@getobdtool.comSkype: getobdtool