HSH-Flo PVC 2 Way DC12V CR303 Electric Motorized Ball Valve 3 Wires Switching Control Valve

MPN: 2A-PD-303 Technical Parameters◎Valve Body Diameter: 1-1/4", 1-1/2", 2" (Optional NPT/BSP)◎Valve Body Material: PVC◎Actuator Material: Engineering Plastics◎Sealing Material: FKM&PTFE◎Wiring Diagram: CR303◎Working Voltage: DC12V (Optional AC/DC9-24V, AC110-230V, DC12V, DC24V)◎Working Current: ≤1A◎Working Medium: Fluid, Air◎Working Pressure: Max 1.0MPa◎Switching Time: ≤15s / ≤12s◎Life Time: 70000 times (Testing pressure is 0.4MPa, medium is water)◎Actuator Rotation Angle: 90° / 360°◎Torque Force: 10N.m / 15N.m◎Cable Length: 0.5m (Optional 1.5m)◎Environment Temperature: -15℃ ~ 50℃◎Liquide Temperature: 2℃ ~ 90℃◎Switch Indicator: YES◎Manual Override: NO(-C) / YES(-B)◎Protection Class: IP67 Application◎HVAC;◎Water Treatment;◎Chemical Process;◎Air Compressor Drainage;◎Automatic Control System;◎Solar Hot Water Engineering;◎Watering Flowers, Regular Humidification;◎Air Conditioning Automatically Humidifies;◎Automatic Control Of Small Industrial Equipment;◎Environmental Protection, Efficient Water-saving;◎Replace Solenoid Valve (Especially when solenoid valve cannot work reliably); Features◎High protection level, can work in most working conditions.◎Reliable performance, large output torque, up to 50000-100000 times, easy to meet various requirements.◎Mechanical and electrical limit integrated design, accurate positioning, high consistency, eliminate valve swing.◎POM gears cooperate with metal gears, POM gears use high-speed to reduce noise, while metal gears use low-speed to ensure the reliability of the gears.◎Full bore design, no leakage, large flow, the valve is bi-directional ball valve, regardless of inlet and outlet; Most suitable for heavy dirt and a state of no action for a long time. Manual Override Instructions◎In case of anelectric supply failure, it is possible to operate the actuator manually.◎Power must in off position when start the manual override.◎Gently putt up the knob about 3mm, then revolve the knob around left and right to control the valve open or close.◎When the red needle in the indicator pointing to "S", means the valve is closed; When pointing to "O", means the valve is open.◎After finish the manual override operation, must press down the knob, so that for the normal electric operation.