Coaxial/ Optical Toslink Digital Audio Extender Over CAT5e/6/7 Ethernet Cable 300m DANX300

Coaxial/ Optical Toslink Digital Audio Extender Over CAT5e / CAT6/ CAT7 Ethernet Cable 984ft (300m) Extension Adapter, Supports Power Over Cable PoC, 5.1-Channel, Supports Dolby Digital 5.1, DTS 5.1, DTS-HD, PCM, Supports Coaxial and Optical Toslink outputs at the same time, Plug and Play, Metal Case Conveniently extend Coaxial or Optical Toslink audio signals up to 984ft. (300m) over a single ethernet CAT5e/ CAT6/ CAT7 cable. Keep your media devices in a clean and secure area while utilizing external speaker systems in remote areas. Streamlines audio installations by allowing source devices to be located in off-site or unseen rack.  Features: * Extend Coaxial or Optical Toslink audio signals up to 984ft (300m) over a single Ethernet CAT5e/6/7 RJ45 cable.* Supports Coaxial and Optical Toslink Digital Audio 5.1-channel, Dolby Digital 5.1, DTS 5.1, DTS-HD, PCM* Simultaneously produce audio to both Coaxial and Optical Toslink outputs on the Receiver end. Only one input source can be used at a time on the Transmitter. * Supports Power over Cable (PoC), allows 1 power adapter connected to the TX to power the RX through CAT cable. * Plug and play, No need driver installation, very easy to use. * Metal case, more durable and longer service life.  Specifications: Input: 1x Coaxial port, 1x Toslink port, 1x Ethernet RJ45 portOutput: 1x Coaxial port, 1x Toslink port, 1x Ethernet RJ45 portPower Supply: 1x DC 5V/1A power jackExtend Coaxial or Optical Toslink audio signals up to 984ft over a single ethernet cable.Supports Coaxial/ Optical Toslink digital audio 5.1, Dolby Digital 5.1, DTS-HD 5.1, DTS-HD, and PCM. Receiver converts/extracts the incoming audio signal from either coaxial or Toslink and sends it to both outputs simultaneously. Supports Power Over Cable(POC), only need one DC power adapter.